Excavator (Mining)
Show/hide table
 | |
| Illustration 1 | g02896116 |
Depending on the model, the PIN Plate (1) is located on the front or left side of the swing frame.
The Service Information Number plate (2) is located in the operator compartment on the base of the seat. Or the plate is located at the rear of the operator compartment.
The serial number plate (3) for the engine is located on top of the valve cover for the engine. Or the plate is located on the side of the engine block.
Caterpillar Information System:
3512B Marine Auxiliary Engine Engine Will Not Crank
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0444 - FMI 12
Product Identification Numbers (PIN) Location Guide General Information
Troubleshooting for Marine Engine Electronic Displays Cat Data Link Circuit - Test
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Schematics and Wiring Diagrams
3412C Engine Camshaft Idler Gear - Remove and Install
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Abbreviations
SPS342 Skid Mounted Pumper Manual Stop Procedure
G3600 Engines Valve Mechanism
2003/12/29 New Process for Reporting Incidents {0337}
3034 Marine Engine Engine Crankcase Breather - Clean/Replace
Electronic Modular Control Panel II (EMCP II) GSC CID 0443 - FMI 12
2001/05/01 Guidelines For The Reusability Of Studs And Bolts {1100, 1203, 1218}
Product Identification Numbers (PIN) Location Guide Off-Highway Truck/Tractor/Quarry Truck
3034 Marine Engine Fuel System - Prime
SPS342 Skid Mounted Pumper Fan Drive Bearing - Lubricate
Electronic Modular Control Panel II (EMCP II) GSC CID 0445 - FMI 12 (for EUI Engines)
SPS342 Skid Mounted Pumper Air Tank Moisture and Sediment - Drain
Electronic Modular Control Panel II (EMCP II) GSC CID 0445 - FMI 12 (for MUI Engines)
SPS342 Skid Mounted Pumper Drive Shaft Universal Joints - Lubricate
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Reference Material
UPS 250 and UPS 300 Uninterruptible Power Supplies Electrical Connections
Electronic Modular Control Panel II+ (EMCP II+) Spare Input/Output Programming OP6 - For EUI And PEEC Engines
Electronic Modular Control Panel II+ (EMCP II+) Spare Input/Output Programming OP6 - For MUI Engines