Check Valve (Cooler Bypass) - Remove and Install
Start By:
- Release the hydraulic system pressure
- Refer to the Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g02352890 - Remove cover assembly (1).
Show/hide table
Illustration 2 g02352990 - Remove bolts (5) in order to disconnect tube assemblies (7). Remove bolts (3) and reposition hose assembly (4). Remove bolts (2) and check valve (6).
- Install check valve (6) in the reverse order of removal.
- Tighten bolts (2) to a torque of
80 ± 8 N·m (60 ± 6 lb ft) . - Tighten bolts (5) to a torque of
50 ± 10 N·m (37 ± 7 lb ft) .
- Tighten bolts (2) to a torque of
Caterpillar Information System:
326F, 329F and 330F Excavators Machine Systems Window Wiper Motor - Remove and Install - Upper
349F and 352F Excavators Machine System Specifications Front Idler
326F, 329F and 330F Excavators Machine Systems Counterweight - Remove and Install
345D and 349D Excavators TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 345D and 349D Excavators TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
326F, 329F and 330F Excavators Machine Systems Cab - Remove and Install
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System MID 039 - CID 0100 - FMI 04
2013/09/18 Cable Straps are Now Used to Prevent Hose Interference and Extend the Service Life of Hydraulic Hoses on Certain Mini Hydraulic Excavators {5057}
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System MID 039 - CID 0100 - FMI 03
2013/09/19 An Improved Bulk Hose is Now Used for Certain Mini Hydraulic Excavators {5056}
335F Excavator Machine Systems Diagnostic Trouble Codes
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System MID 039 - CID 0017 - FMI 06
326F, 329F and 330F Excavators Machine Systems Window Wiper Motor - Remove and Install - Lower
2013/09/20 Machine ECM Software has been Improved for Certain 300D Series Excavators {7610, 7620}
326F, 329F and 330F Excavators Machine Systems Hydraulic Lockout Control - Remove and Install
326F, 329F and 330F Excavators Machine Systems Seat - Remove and Install
326F, 329F and 330F Excavators Machine Systems Seat Support - Remove and Install
Installation Procedure for the 377-8218 Valve Wiring Gp on Certain Hydraulic Excavators{1408} Installation Procedure for the 377-8218 Valve Wiring Gp on Certain Hydraulic Excavators{1408}
2013/09/10 A New Monitor Software is Now Available for Certain Excavators {7490}
326F, 329F and 330F Excavators Machine Systems Seat Suspension - Remove and Install
302.5C Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 302.5C Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
336E OEM Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 336E OEM Excavator TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
2013/09/04 A New Machine Software is Now Available for Certain 336E H Excavators {7610, 7620}
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System MID 039 - CID 0460 - FMI 03
349F and 352F Excavators Engine Supplement Hydraulic Oil Cooler - Remove and Install