- Excavator:
- 312E (S/N: GAC1-UP; MJD1-UP; PZL1-UP; WEY1-UP)
- Mobile Hydraulic Power Unit:
- 312E MHPU (S/N: EGR1-UP)
- 314E (S/N: DKD1-UP; ECN1-UP; ZJT1-UP; YCW1-UP)
- 316E (S/N: DZW1-UP; WZY1-UP; YZZ1-UP)
- 318E (S/N: DZF1-UP; WZS1-UP)
- 320E (S/N: REE1-UP; SXE1-UP; DFG1-UP; TNJ1-UP; LAK1-UP; WBK1-UP; PNL1-UP; LHN1-UP; AWS1-UP; KLT1-UP; MEW1-UP; TEX1-UP; TFX1-UP; NAZ1-UP)
- 323D2 (S/N: PJP1-UP)
- 323E (S/N: RAP1-UP; YRP1-UP; TDW1-UP)
- 324E (S/N: KTE1-UP; TLF1-UP; LDG1-UP; PNW1-UP; JCZ1-UP)
- 329E (S/N: RLD1-UP; ZCD1-UP; WJK1-UP; TST1-UP; PLW1-UP; RDX1-UP; PTY1-UP)
- 336E (S/N: RZA1-UP; KED1-UP; YCE1-UP; TEG1-UP; FJH1-UP; GTJ1-UP; JRJ1-UP; SSL1-UP; YEP1-UP; CMR1-UP; BZY1-UP; TMZ1-UP)
- 349E (S/N: FJB1-UP; DGE1-UP; SPG1-UP; TFG1-UP; RGH1-UP; KCN1-UP; MZW1-UP; KFX1-UP; MPZ1-UP; WHZ1-UP)
- 320E MHPU (S/N: EGX1-UP)
- 329E MHPU (S/N: K2L1-UP; KNR1-UP)
- 336E MHPU (S/N: PCE1-UP; RBS1-UP; DSZ1-UP; T3Z1-UP)
- 349E MHPU (S/N: JAE1-UP; S3P1-UP)
ReferenceSpecial Instruction
The 433-4527 Monitor Software Gp has been improved to 444-7835 Monitor Software Gp in order to add the end tag check process of the software before starting flash programming. The function of the end tag check process is to check the end tag of flash file before installing. If there is no end tag, error code $0207 is indicated on monitor and flash process stops automatically. If error code $0207 is indicated, refer to Special Instruction, REHS7542. When it does not go well, execute the flash process again by downloading the software from SIS web.
The 436-6218 Monitor Software Gp is available to help downloading the monitor software when the monitor screen presents the following screens shown in Illustration 1 and 2. The service software should be installed to the monitor by ET.
Illustration 1 | g03430652 |
Illustration 2 | g03430654 |
Refer to Table 1 for the new part numbers.
Item     | Qty     | New Part Number     | Part Name     | Former Part Number     |
---|---|---|---|---|
1     | 1     | 436-6218     | Monitor Software Gp     | -     |
2     | 1     | 444-7835     | Monitor Software Gp     | 433-4527     |
Note: Go to SIS Web to make sure that the new flash file part number is still the latest flash file part number. A newer flash file part number may be available. SIS Web only displays the latest available flash file. The new software is available in the form of a flash file through Caterpillar Service Information System (SIS).