Air Inlet Elbow
Show/hide table
 | |
| Illustration 1 | g00621798 |
Typical Example | |
(1) Air Inlet Elbow
Apply 1U-8846 Liquid Gasket to the face of the elbow and spread the sealant uniformly. The elbow must be assembled and tightened within ten minutes.
(2) Tighten the bolts to the following torque. ... 28 ± 7 N·m (21 ± 5 lb ft)
Caterpillar Information System:
3406E Generator Set Engines Reference Numbers
3406E Generator Set Engines Generator Identification
3406E Generator Set Engines Engine Description
XQ300, XQ400 Rental Generator Sets Model View Illustrations
3406E Marine Engine Engine Oil Filter Base - Assemble
2001/02/01 A New Fuel Ratio Control (FRC) is Available for Stanadyne Fuel Injection Pumps on some 3054 and 3056 Turbocharged Engines {1278}
C-9 Industrial Engine Turbocharger
2001/02/01 The New 187-6273 Machining Tool Group (G3600 Prechamber Assembly) Is Available {1106}
3406E and C15 Marine Engines Turbocharger - Assemble
3306B-XQ200 Rental Generator Set Engine Fuel System Secondary Filter - Replace
PM3516 Power Modules Fan Motor - Lubricate
3116 On Highway Engines Fuel Transfer Pump - Remove and Install
XQ300, XQ400 Rental Generator Sets Enclosure Identification
XQ300, XQ400 Rental Generator Sets Trailer Identification
2001/02/01 A New Service Is Available For 3600 Engine Fuel Injectors {1290, 1290}
3306B-XQ200 Rental Generator Set Engine Engine Oil and Filter - Change
795F and 795F Series AC Off-Highway Truck Power Train Final Drive, Brake and Wheel (Rear) - Assemble
3306B-XQ200 Rental Generator Set Engine Starting the Engine
G3516B and G3520B Generator Set Engines Heat Exchanger - Remove
C-9 Industrial Engine Water Pump
3126B and 3126E On-highway Engines 0190-00 Engine Overspeed Warning (35)
3126B and 3126E On-highway Engines 0105-11 Very High Intake Manifold Air Temperature (64)
3126B and 3126E On-highway Engines 0105-00 High Intake Manifold Air Temperature Warning (64)
G3516B and G3520B Generator Set Engines Heat Exchanger - Install