Type 1
 | |
| Illustration 1 | g00760594 |
(1) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.5 ± 1.5 mm (0.41 ± 0.06 inch)
Tighten the stud to the following torque. ... 68 ± 7 N·m (50 ± 5 lb ft)
(2) Apply engine oil to the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Additionally tighten the oil filter by 3/4 of a turn.
 | |
| Illustration 2 | g00760654 |
View A-A | |
(3) 4N-8150 Spring
- Length under test force ... 55.25 mm (2.175 inch)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
- Free length after test ... 93.7 mm (3.69 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- The filter and the cooler bypass valves will open with the following pressure difference. ... 255 ± 20 kPa (37 ± 3 psi)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
(4) Tighten the plug to the following torque. ... 100 ± 15 N·m (74 ± 11 lb ft)
Type 2
 | |
| Illustration 3 | g00760313 |
Right view | |
(1) Oil Filter Adapter
 | |
| Illustration 4 | g00760757 |
View A-A | |
(2) 4N-8150 Spring
- Length under test force ... 55.25 mm (2.175 inch)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
- Free length after test ... 93.7 mm (3.69 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- The filter and the cooler bypass valves will open with the following pressure difference. ... 255 ± 20 kPa (37 ± 3 psi)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
(3) Tighten the plug to the following torque. ... 100 ± 15 N·m (74 ± 11 lb ft)
 | |
| Illustration 5 | g00760356 |
Top view | |
(4) Oil Filter Base
 | |
| Illustration 6 | g00760397 |
Right view | |
(5) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.2 ± 1.5 mm (0.40 ± 0.06 inch)
Tighten the stud to the following torque. ... 80 ± 14 N·m (59 ± 10 lb ft)
(6) Apply engine oil to the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Additionally tighten the oil filter by 3/4 of a turn.
Type 3
 | |
| Illustration 7 | g00760500 |
Right view | |
(1) Oil Filter Adapter
| | |
| Illustration 8 | g00760757 |
View A-A | |
(2) 4N-8150 Spring
- Length under test force ... 55.25 mm (2.175 inch)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
- Free length after test ... 93.7 mm (3.69 inch)
- Outside diameter ... 20.6 mm (0.81 inch)
- The filter and the cooler bypass valves will open with the following pressure difference. ... 255 ± 20 kPa (37 ± 3 psi)
- Test force ... 76 ± 5.8 N (17 ± 1.30 lb)
(3) Tighten the plug to the following torque. ... 100 ± 15 N·m (74 ± 11 lb ft)
 | |
| Illustration 9 | g00760521 |
Top view | |
(4) Oil Filter Base
 | |
| Illustration 10 | g00760507 |
Front view | |
(5) Apply 9S-3263 Thread Lock Compound on the tapered end of the stud to the following dimension. ... 10.2 ± 1.5 mm (0.40 ± 0.06 inch)
Tighten the stud to the following torque. ... 80 ± 14 N·m (59 ± 10 lb ft)
(6) Apply engine oil to the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Additionally tighten the oil filter by 3/4 of a turn.