Stick Cylinder
Show/hide table
Illustration 1 | g02645236 |
Show/hide table
Specification for 234-4601 Stick Cylinder Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 1     | 241-7342 Bushing     | During the press fit, insert the bushing (1) in the cap assembly with the tapered side first. Inside diameter before assembly is 90.16 ± 0.02 mm (3.550 ± 0.001 inch). Installation depth is 9.85 ± 0.30 mm (0.388 ± 0.012 inch).     |
2     | 1     | 7Y-4956 Locknut     | Use any one of the following methods to tighten the locknut: Before assembly, lubricate the threads of the locknut (2) with 309-6932 Hydraulic Oil all around and then torque to 15500 ± 800 N·m (11432 ± 590 lb ft). Or Lubricate the threads of the locknut (2) with molybdenum disulfide and then torque to 11500 ± 600 N·m (8482 ± 443 lb ft).     |
3     | 2     | 191-5604 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
4     | 1     | 9X-3607 Seal As     | Lubricate the inside diameter and the outside diameter with clean grease.     |
5     | 1     | 191-5605 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
A     | 1     | 242-6806 Cylinder As     | Bore is 170.00 ± 0.10 mm (6.693 ± 0.004 inch).     |
B     | 1     | 242-6811 Rod As     | Diameter is 114.93 ± 0.03 mm (4.525 ± 0.001 inch).     |
C     | 1     | 191-5602 Head     | Bore is 115.63 ± 0.03 mm (4.552 ± 0.001 inch).     |
6     | During the press fit, insert the bushing (6) in the rod assembly with the tapered side first. The bushing is one of the following part numbers:     |
||
1 | 290-9183 Bushing     | Inside diameter before assembly is 90.25 ± 0.04 mm (3.553 ± 0.002 inch). Installation depth is 10.0 ± 0.5 mm (0.39 ± 0.02 inch).     |
|
1 | 343-9342 Bushing     | Inside diameter before assembly is 90.16 ± 0.02 mm (3.550 ± 0.001 inch). Installation depth is 10.0 ± 0.5 mm (0.39 ± 0.02 inch).     |
|
7     | 1     | 107-6933 Stop     | Free linear movement of the stop after assembly is 0.50 ± 0.26 mm (0.020 ± 0.010 inch).     |
8     | 2     | 095-0930 Retaining Ring     | Maximum outside diameter of the retaining rings after assembly is 81.0 mm (3.19 inch).     |
9     | 1     | 231-6843 Seal Ring     | The slit of the seal ring must turn in the direction of the piston.     |
10     | 1     | 191-5644 Bushing     | Outside diameter is 120.148 ± 0.032 mm (4.7302 ± 0.0013 inch). Thickness is 1.2 ± 0.3 mm (0.05 ± 0.01 inch).     |
11     | 1     | 191-5645 Buffer Seal     | Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed.     |
12     | 1     | 191-5646 U-Cup Seal     | Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed.     |
13     | 1     | 191-5648 Lip Type Seal     | Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed.     |
14     | -     | -     | Before assembly, apply green Loctite 609 to the wiper seal groove.     |
Caterpillar Information System:
330D and 336D Excavators Machine System Specifications Return and Oil Filter Lines
301.4C Mini Hydraulic Excavator Travel Motor
301.4C Mini Hydraulic Excavator Hydraulic System Breather - Replace
301.4C Mini Hydraulic Excavator Fuel Injection Nozzles - Check/Adjust
301.4C Mini Hydraulic Excavator Hydraulic System Oil Filter (Pilot) - Check/Replace
301.4C Mini Hydraulic Excavator Swing Gear Grease - Check
345B Series II Excavator Machine System Specifications Bucket Cylinder
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Rotator Cycle Time - Check
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Cylinder Cycle Time - Check
320E and 323E Excavators Machine Systems Oil Filter (Hydraulic, Return)
301.4C Mini Hydraulic Excavator Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Install
G3512 Gas Engine Flywheel
329E MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pads - Remove and Install
320E RR Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712} Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712}
320E RR Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
330D and 336D Excavators Machine System Specifications Hydraulic Generator
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Wear Plates - Remove and Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Install
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
G310B, G315B and G320B Demolition and Sorting Grapples Host Machine Pressure and Flow - Test