Bucket Cylinder
Show/hide table
Illustration 1 | g02645016 |
Show/hide table
Specification for 225-4529 Bucket Cylinder Gp and 274-2456 Bucket Cylinder Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 087-5533 Bushing | Inside diameter before assembly is Installation depth is |
2 | 1 | 123-2112 Special Locknut | Before assembly, lubricate the face and the threads of the special locknut (2) with 309-6932 Hydraulic Oil all around.
Torque to |
3 | 2 | 185-0230 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
4 | 1 | 9X-3604 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
5 | 1 | 185-0231 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
A | 1 | 118-3936 Cylinder As | Bore is |
B | 1 | 247-8904 Rod As | Diameter is |
C | 1 | Head | Bore is |
6 | 1 | 087-5548 Bushing | Inside diameter before assembly is Installation depth is |
7 | 1 | 114-0762 Bushing | Outside diameter before assembly is Thickness is |
8 | 1 | Buffer Seal | Lubricate the sealing lip of the buffer seal lightly with the lubricant that is being sealed. |
9 | 1 | U-Cup Seal | Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. |
10 | 1 | 165-9291 Lip Type Seal | Lubricate the sealing lip of the lip type seal lightly with the lubricant that is being sealed. |
11 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
Caterpillar Information System:
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Rotator Cycle Time - Check
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Cylinder Cycle Time - Check
320E and 323E Excavators Machine Systems Oil Filter (Hydraulic, Return)
301.4C Mini Hydraulic Excavator Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Remove
Installation of the 275-1399 Front Lines Gp on Certain 320D Hydraulic Excavators{5057} Installation of the 275-1399 Front Lines Gp on Certain 320D Hydraulic Excavators{5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Disassemble
2011/10/19 An Improved Hood Latch Is Now Used Used for Certain D Series Excavators {7251}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Remove
301.4C Mini Hydraulic Excavator Swing Gear Grease - Check
301.4C Mini Hydraulic Excavator Hydraulic System Oil Filter (Pilot) - Check/Replace
301.4C Mini Hydraulic Excavator Fuel Injection Nozzles - Check/Adjust
301.4C Mini Hydraulic Excavator Hydraulic System Breather - Replace
301.4C Mini Hydraulic Excavator Travel Motor
330D and 336D Excavators Machine System Specifications Return and Oil Filter Lines
330D and 336D Excavators Machine System Specifications Stick Cylinder
G3512 Gas Engine Flywheel
329E MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pads - Remove and Install
320E RR Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712} Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws{6712}