Oil Pan - Remove and Install
Removal Procedure
- Drain the engine oil.
- Remove guard assemblies (1) .
Show/hide table
Illustration 1 | g02440317 |
- Remove dip stick (2) .
Show/hide table
Illustration 2 | g02440318 |
- Remove hose assembly (3), harness assembly (4), bolts (5), oil pan (6), and the gasket.
Show/hide table
Illustration 3 | g02440319 |
Note: Mark the location for each of bolts (5). The bolts are not all the same length.
- Remove bolts (7) and spacer (8) .
Show/hide table
Illustration 4 | g02440322 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | -     | Guide Stud M8 by 100mm     |
4     |
B     | 6V-6640     | Sealant     | -     |
- Install spacer (8) and bolts (7) .
Show/hide table
Illustration 5 | g02440322 |
- Install Tooling (A) in locations (X). Install the gasket and oil pan (6) .
Show/hide table
Illustration 6 | g02440358 |
- Install bolts (5). Tighten bolts (5) in the sequence shown, to a torque of 22 N·m (195 lb in).
Show/hide table
Illustration 7 | g02440376 |
Show/hide table
Illustration 8 | g02440378 |
- Remove Tooling (A). Install the remainder of bolts (5). Tighten bolts (5) in the sequence shown, to a torque of 22 N·m (195 lb in).
- Install hose assembly (3) and harness assembly (4) .
Show/hide table
Illustration 9 | g02441036 |
- Apply Tooling (B) to the nut and install dip stick (2) .
Show/hide table
Illustration 10 | g02440318 |
- Install guard assemblies (1) .
Show/hide table
Illustration 11 | g02440317 |
End By: Fill the engine oil.
Caterpillar Information System:
Wheeled Excavators Monitoring System Language Select Menu
Wheeled Excavators Monitoring System Display Setting Menu
Installation of the 369-5289 Auxiliary Boom Lines Group on Certain Hydraulic Excavators{5057} Installation of the 369-5289 Auxiliary Boom Lines Group on Certain Hydraulic Excavators{5057}
326F, 329F and 330F Excavators C7.1 Engine Supplement Engine Oil Pump - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Fan - Remove and Install
2011/03/11 Improved Track Carrier Roller is Now Used on 365C and 385C Excavators {4154}
Installation Procedure for the 330-2528 Pilot Lines Gp {5057, 5059} Installation Procedure for the 330-2528 Pilot Lines Gp {5057, 5059}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve
Wheeled Excavators Monitoring System Menu Outline
Installation Procedure for the 330-2526 Pilot Lines Gp {5057, 5059} Installation Procedure for the 330-2526 Pilot Lines Gp {5057, 5059}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator
Wheeled Excavators Monitoring System Password Entry
326F, 329F and 330F Excavators C7.1 Engine Supplement Engine Oil Cooler - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Engine Electronic Control - Remove and Install
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Combustion Head - Remove and Install - Clean Emissions Module
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit C7.1 Engine Supplement Electric Starting Motor - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
440 and 450 Backhoe Loader Mirror - If Equipped
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
300.9D VPS Mini Hydraulic Excavator Machine Systems Blade Cylinder
Installation Instructions for 363-4479 Hydraulic Kit (Center Lock) for 308C CR Excavators{5057} Installation Instructions for 363-4479 Hydraulic Kit (Center Lock) for 308C CR Excavators{5057}
Installation Instructions for 362-2996 Hydraulic Kit (Center Lock) for 308C CR Excavators{1408, 5079, 5479, 6129} Installation Instructions for 362-2996 Hydraulic Kit (Center Lock) for 308C CR Excavators{1408, 5079, 5479, 6129}
Installation Instructions for 368-6422, 368-6423, 368-6424 Coupler Lines Gp for 966K and 972K Wheel Loaders {0679, 1408, 5057, 5133, 6129} Installation Instructions for 368-6422, 368-6423, 368-6424 Coupler Lines Gp for 966K and 972K Wheel Loaders {0679, 1408, 5057, 5133, 6129}
Wheeled Excavators Monitoring System Performance Menu