Engine Oil Pressure
Usage:
Be sure that the engine is filled the correct level with SAE 10W30 oil. If any other viscosity of oil is used, the information in the Engine Oil Pressure Graph does not apply.
Operate the engine to get it to normal operating temperature.
NOTE: Make sure engine oil temperature does not go above 115°C (239°F).
Engine Oil Pressure Graph
* Engine speed is limited to 1350 rpm when the oil pressure is below the low oil pressure limit.
Caterpillar Information System:
3408C & 3412C INDUSTRIAL ENGINES Engine Oil Bypass Valve
3408C & 3412C INDUSTRIAL ENGINES Engine Oil Filters And Lines Group
3408C & 3412C INDUSTRIAL ENGINES Engine Oil Pump
3408C & 3412C INDUSTRIAL ENGINES Turbocharger Lines Group
3408C & 3412C INDUSTRIAL ENGINES Turbocharger
3408C & 3412C INDUSTRIAL ENGINES Trunnion Group
3408C & 3412C INDUSTRIAL ENGINES Aftercooler Group
3408C & 3412C INDUSTRIAL ENGINES Exhaust Manifolds
3408C & 3412C INDUSTRIAL ENGINES Inlet Air And Exhaust Lines
3408C & 3412C INDUSTRIAL ENGINES Camshaft
3408C & 3412C INDUSTRIAL ENGINES Front Gear Group (Timing)
3408C & 3412C INDUSTRIAL ENGINES Front Housing And Covers
3408C & 3412C INDUSTRIAL ENGINES Oil Pan
3408C & 3412C INDUSTRIAL ENGINES Oil Breather Cap
3408C & 3412C INDUSTRIAL ENGINES Water Pump
3408C & 3412C INDUSTRIAL ENGINES Coolant Conditioner Base
3408C & 3412C INDUSTRIAL ENGINES Water Temperature Regulator
3408C & 3412C INDUSTRIAL ENGINES Belt Tension Chart
3408C & 3412C INDUSTRIAL ENGINES Cylinder Block
3408C & 3412C INDUSTRIAL ENGINES Cylinder Liners
3408C & 3412C INDUSTRIAL ENGINES Cylinder Liner Projection
3408C & 3412C INDUSTRIAL ENGINES Crankshaft
3408C & 3412C INDUSTRIAL ENGINES Crankshaft Rear Gear
3408C & 3412C INDUSTRIAL ENGINES Connecting Rod And Main Bearing Journals