3500B Industrial Engine Caterpillar


Specifications

Usage:

3508B CBB

Table 1
3508B Industrial Engine Specifications 
Rated speed (rpm)  1800 
Idle speed (rpm)  600 
Cylinders and arrangement  60 degree V-8 
Bore  170 mm (6.7 inch) 
Stroke  190 mm (7.5 inch) 
Type  4 stroke cycle  
Aspiration  Turbocharged
Aftercooled 
Displacement per cylinder  4.3 L (263 in3)  
Total displacement  34.5 L (2105 in3) 
Rotation (flywheel end)  Counterclockwise 
Fuel  See this Operation and Maintenance Manual, "Refill Capacities and Recommendations" (Maintenance Section). 
Method of starting  Air starting motor 
Maximum allowable air inlet restriction  6.2 kPa (25 inches of H2O) 


Illustration 1g00739600
Engine design
(A) Inlet valve
(B) Exhaust valve
(C) Flywheel

Caterpillar Information System:

3500B Industrial Engine Product Description
3500B Industrial Engine Model View Illustrations
SPT343 Truck Mounted Pumper Cooling System Coolant Level - Check
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
3126B and 3126E On-highway Engines Cruise Control Switch Circuit - Test
Oil Mist Detectors General Information
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
3126B Engines Electrical System
3126B and 3126E On-highway Engines Transmission (AT/MT/HT) Relay Circuit - Test
Installation and Maintenance of the Powered Fumes Disposal Filter {1074} Installation and Maintenance of the Powered Fumes Disposal Filter {1074}
3500 Petroleum Engines and Petroleum Generator Sets Plate Locations and Film Locations
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
3126B and 3126E On-highway Engines Clutch Pedal Position Switch Circuit - Test
3126B Industrial Engine Fuel System
3126B and 3126E On-highway Engines Fast Idle Lamp Circuit - Test
3500B Industrial Engine Maintenance Recommendations
3512B Petroleum Engine Reference Material
SPT343 Truck Mounted Pumper Before Starting Engine
2000/08/01 Correction to Troubleshooting Guide , "PB-18: Exhaust Brake Relay and AT/MT/HT Transmission Relay Circuits Test" for the 3126B Truck Engine {1093, 1901}
3618 Engine Fuel Injector Synchronization
Oil Mist Detectors Maintenance Schedule
3126B and 3126E On-highway Engines 0110-00 High Coolant Temperature Warning (61)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.