Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.
Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Caterpillar dealer can provide new messages.
| |
| Illustration 1 | g01592308 |
|
Additional messages inside cab (if equipped) | |
| |
| Illustration 2 | g01677433 |
|
Additional messages inside cab (if equipped) | |
| |
| Illustration 3 | g01677434 |
Clean Glass (1)
This message is located in three places on the cab windows.
| |
| Illustration 4 | g01134495 |
| NOTICE |
|---|
|
Clean windows with a wet cloth or sponge. Dry cloth or sponge may scratch window material. |
Data Privacy (2)
| |
| Illustration 5 | g01418953 |
The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.
Refer to Operation and Maintenance Manual, "Product Link" for more information.
Alternate Exit (3)
If equipped, this message is located in the upper right corner of the rear window.
| |
| Illustration 6 | g00915906 |
If the Primary exits are blocked, pull the ring in order to open the rear window. Exit the machine through the window opening.
For more information, refer to Operation and Maintenance Manual, "Alternate Exit".
Ring for the Alternate Exit (4)
If equipped, this message is located on the ring for the alternate exit.
| |
| Illustration 7 | g00915912 |
Pull the ring in order to open the alternate exit. Exit the machine through the window opening.
For more information, refer to Operation and Maintenance Manual, "Alternate Exit".
Machine Security System (5)
This message is located on the window on the right side of the cab.
| |
| Illustration 8 | g00951606 |
This machine may be equipped with a security system. Read the Operation and Maintenance Manual before you operate the machine.
Alternate Exit Lock/Unlock (6)
If equipped, this message is located on the rear window in the cab.
| |
| Illustration 9 | g01353053 |
| NOTICE |
|---|
|
Unlock alternate exit window during machine operations. |
Move the lever to the left to the UNLOCK position. Move the lever to the right to the LOCK position. Exit through rear window.
For more information, refer to Operation and Maintenance Manual, "Alternate Exit".
Radial Air Cleaner (7)
This message is located on the cover of the air cleaner.
| |
| Illustration 10 | g01134494 |
In order to avoid engine damage, replace old filters with radial seal air filters.
The location and design of the gasket for the radial seal air filter is critical to the proper operation of the air cleaner element. Use only Caterpillar replacements.
No Step (8)
This message is located on the engine hood on the top of the machine. This message is also located on the cover plate under the engine hood.
| |
| Illustration 11 | g00911158 |
Do not step in this area.