E026 High Inlet Air Temperature Shutdown
Conditions Which Generate This Code:
The crank terminate relay is set and the engine has been running for at least 30 seconds. The inlet air temperature has exceeded the trip point and the delay time has expired. No other codes for the inlet air temperature are active.
System Response:
The fuel is shut off. The shutdown output is activated. The code is logged.
Possible Performance Effect:
The engine is shut down.
Troubleshooting:
Test Step 1.
Refer to Troubleshooting, "Inlet Air Temperature (High)".
Results:
- OK - STOP
Caterpillar Information System:
G3520B Engines E025 High Inlet Air Temperature Derate
G3516B Engines E020 High Engine Oil Temperature Warning
3064 and 3066 Engines for Caterpillar Built Machines Flywheel - Inspect
G3516B Engines E019 High Engine Oil Temperature Shutdown
G3516B Engines E017 High Engine Coolant Temperature Warning
G3516B Engines E016 High Engine Coolant Temperature Shutdown
G3516B Engines MID 111 - CID 0591 - FMI 12 EEPROM checksum fault or ECM not programmed
G3408C and G3412C Engines Product Description
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Inspect
G3520B Engines E015 High Engine Coolant Temperature Derate
Programmable Relay Control Module (PRCM) General Information
3114, 3116, and 3126 Engines General Information
G3516B Engines E027 High Inlet Air Temperature Warning
G3516B Engines E038 Low Engine Coolant Temperature Warning
G3408C and G3412C Engines Ignition System Spark Plugs - Inspect/Replace
G3516B Engines E040 Low Engine Oil Pressure Shutdown
Programmable Relay Control Module (PRCM) Programmable Relay Control Module
3126B and 3126E On-highway Engines Customer Specified Parameters Worksheet
G3516B Engines E043 Low System Voltage Warning
G3516B Engines E050 High System Voltage Warning
G3516B Engines E053 Low Fuel Pressure Warning
G3516B Engines E096 High Fuel Pressure
G3516B Engines E100 Low Engine Oil Pressure Warning
G3516B Engines E337 High Engine Oil to Engine Coolant Diff Temp