E015 High Engine Coolant Temperature Derate
Conditions Which Generate This Code:
The crank terminate relay is set and the engine has been running for at least 30 seconds. The engine coolant temperature has exceeded the trip point and the delay time has expired. No other codes for the engine coolant are active.
System Response:
The alarm output is activated. The event is logged.
The engine power is reduced.
Test Step 1.
Refer to Troubleshooting, "Engine Coolant Temperature (High)".
Results:
- OK - STOP
Caterpillar Information System:
Programmable Relay Control Module (PRCM) General Information
3114, 3116, and 3126 Engines General Information
G3408C and G3412C Engines Model View Illustrations
G3516B Engines E004 Engine Overspeed Shutdown
3126B and 3126E On-highway Engines Customer Specified Parameters Table
Programmable Relay Control Module (PRCM) Electrical
3064 and 3066 Engines for Caterpillar Built Machines Connecting Rod - Inspect
G3300 Engines Fire Prevention and Explosion Prevention
3054 and 3056 Industrial and Generator Set Engines Fire Prevention and Explosion Prevention
Programmable Relay Control Module (PRCM) Environmental
3412 Generator Set Engines Cooling System
Electronic Modular Control Panel II (EMCP II) EMCP Electronic Control (Generator Set)
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Inspect
G3408C and G3412C Engines Product Description
G3516B Engines MID 111 - CID 0591 - FMI 12 EEPROM checksum fault or ECM not programmed
G3516B Engines E016 High Engine Coolant Temperature Shutdown
G3516B Engines E017 High Engine Coolant Temperature Warning
G3516B Engines E019 High Engine Oil Temperature Shutdown
3064 and 3066 Engines for Caterpillar Built Machines Flywheel - Inspect
G3516B Engines E020 High Engine Oil Temperature Warning
G3520B Engines E025 High Inlet Air Temperature Derate
G3516B Engines E026 High Inlet Air Temperature Shutdown
G3516B Engines E027 High Inlet Air Temperature Warning
G3516B Engines E038 Low Engine Coolant Temperature Warning