G3516B Engines Caterpillar


E020 High Engine Oil Temperature Warning

Usage:

G3516B 7EZ
Conditions Which Generate This Code:

The crank terminate relay is set and the engine has been running for at least 30 seconds. The engine oil temperature has exceeded the trip point and the delay time has expired. No other codes for the engine oil temperature are active.

System Response:

The alarm output is activated. The code is logged.

Possible Performance Effect:

The engine operation is not immediately affected. However, if the engine oil temperature continues to rise, the engine can be shut down.

Troubleshooting:

Test Step 1.

Refer to Troubleshooting, "Engine Oil Temperature (High)".

Results:

  • OK - STOP
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.