M330D Material Handler Caterpillar

Lifting Capacities

Usage:

Note: The following lift capacity charts are for typical configurations. For more information on your specific configuration, see your dealer.

Note: The following lift capacity charts represent the maximum lifting capacities. Each machine is configured differently. The configuration of the machine affects the lifting capacity.

The following conditions affect the lifting capacities:

A - Stabilizer Up

B - Stabilizer Down

F - Lifting capacity over the front or rear of the machine

S - Lifting capacity over the side of the machine

Show/hide table

Table 1
M330D Material Handler with a 10.2 m (33.5 ft) boom and a 8.2 m (26.9 ft) stick. 8300 kg counterweight All lifting capacities are in metric tons.
Radius		3.0 m		4.5 m		6.0 m		7.5 m		9.0 m		10.5 m
Radius		F	S	F	S	F	S	F	S	F	S	F	S
16.5 m	A									5.2 ⁽¹⁾	5.2 ⁽¹⁾
16.5 m	B									5.4 ⁽¹⁾	5.4 ⁽¹⁾	4.0 ⁽¹⁾	4.0 ⁽¹⁾
15.0 m	A											5.3 ⁽¹⁾	5.3 ⁽¹⁾
15.0 m	B											5.4 ⁽¹⁾	5.4 ⁽¹⁾
13.5 m	A											6.3 ⁽¹⁾	6.0
13.5 m	B											6.4 ⁽¹⁾	6.4 ⁽¹⁾
12.0 m	A											7.1 ⁽¹⁾	6.0
12.0 m	B											7.2 ⁽¹⁾	7.2 ⁽¹⁾
10.5 m	A											7.1	5.9
10.5 m	B											8.0 ⁽¹⁾	8.0 ⁽¹⁾
9.0 m	A									9.1	7.5	7.0	5.7
9.0 m	B									9.2 ⁽¹⁾	9.2 ⁽¹⁾	8.2 ⁽¹⁾	8.2 ⁽¹⁾
7.5 m	A									8.7	7.1	6.7	5.5
7.5 m	B							11.0 ⁽¹⁾	11.0 ⁽¹⁾	9.5 ⁽¹⁾	9.5 ⁽¹⁾	8.4 ⁽¹⁾	8.4 ⁽¹⁾
6.0 m	A					14.0 ⁽¹⁾	12.9	11.1	9.0	8.3	6.7	6.4	5.2
6.0 m	B					14.2 ⁽¹⁾	14.2 ⁽¹⁾	11.7 ⁽¹⁾	11.7 ⁽¹⁾	9.9 ⁽¹⁾	9.9 ⁽¹⁾	8.6 ⁽¹⁾	8.6 ⁽¹⁾
4.5 m	A	30.5 ⁽¹⁾	30.5 ⁽¹⁾	20.2 ⁽¹⁾	18.2	14.6	11.6	10.3	8.2	7.7	6.2	6.0	4.8
4.5 m	B	31.4 ⁽¹⁾	31.4 ⁽¹⁾	20.5 ⁽¹⁾	20.5 ⁽¹⁾	15.4 ⁽¹⁾	15.4 ⁽¹⁾	12.3 ⁽¹⁾	12.3 ⁽¹⁾	10.3 ⁽¹⁾	10.3 ⁽¹⁾	8.8 ⁽¹⁾	8.8 ⁽¹⁾
3.0 m	A			18.3 ⁽¹⁾	15.2 ⁽¹⁾	13.1	10.2	9.4	7.4	7.2	5.6	5.7	4.4
3.0 m	B			14.0 ⁽¹⁾	14.0 ⁽¹⁾	16.3 ⁽¹⁾	16.3 ⁽¹⁾	12.8 ⁽¹⁾	12.8 ⁽¹⁾	10.6 ⁽¹⁾	10.6 ⁽¹⁾	9.0 ⁽¹⁾	9.0 ⁽¹⁾
1.5 m	A	2.3 ⁽¹⁾	2.3 ⁽¹⁾	6.4 ⁽¹⁾	6.4 ⁽¹⁾	11.7	8.9	8.6	6.6	6.6	5.2	5.3	4.1
1.5 m	B	2.3 ⁽¹⁾	2.3 ⁽¹⁾	6.0 ⁽¹⁾	6.0 ⁽¹⁾	16.2 ⁽¹⁾	16.2 ⁽¹⁾	13.0 ⁽¹⁾	13.0 ⁽¹⁾	10.6 ⁽¹⁾	10.6 ⁽¹⁾	9.0 ⁽¹⁾	9.0 ⁽¹⁾
0.0 m	A	2.6 ⁽¹⁾	2.6 ⁽¹⁾	5.0 ⁽¹⁾	5.0 ⁽¹⁾	10.2 ⁽¹⁾	8.1	8.0	6.0	6.2	4.7	5.0	3.8
0.0 m	B	2.7 ⁽¹⁾	2.7 ⁽¹⁾	5.0 ⁽¹⁾	5.0 ⁽¹⁾	9.8 ⁽¹⁾	9.8 ⁽¹⁾	12.7 ⁽¹⁾	12.7 ⁽¹⁾	10.4 ⁽¹⁾	10.4 ⁽¹⁾	8.8 ⁽¹⁾	8.8 ⁽¹⁾
-1.5 m	A	3.2 ⁽¹⁾	3.2 ⁽¹⁾	4.9 ⁽¹⁾	4.9 ⁽¹⁾	8.3 ⁽¹⁾	7.6	7.5	5.6	5.9	4.4	4.8	3.6
-1.5 m	B	3.3 ⁽¹⁾	3.3 ⁽¹⁾	5.0 ⁽¹⁾	5.0 ⁽¹⁾	8.2 ⁽¹⁾	8.2 ⁽¹⁾	11.9 ⁽¹⁾	11.9 ⁽¹⁾	9.9 ⁽¹⁾	9.9 ⁽¹⁾	8.3 ⁽¹⁾	8.3 ⁽¹⁾
-3.0 m	A	3.8 ⁽¹⁾	3.8 ⁽¹⁾	5.2 ⁽¹⁾	5.2 ⁽¹⁾	7.8 ⁽¹⁾	7.3	7.3	5.4	5.7	4.2	4.6	3.4
-3.0 m	B			5.3 ⁽¹⁾	5.3 ⁽¹⁾	7.8 ⁽¹⁾	7.8 ⁽¹⁾	10.7 ⁽¹⁾	10.7 ⁽¹⁾	9.0 ⁽¹⁾	9.0 ⁽¹⁾	7.6 ⁽¹⁾	7.6 ⁽¹⁾
-4.5 m	A			5.6 ⁽¹⁾	5.6 ⁽¹⁾	7.9 ⁽¹⁾	7.3	7.2	5.3	5.6	4.1	4.5	3.3
-4.5 m	B			5.7 ⁽¹⁾	5.7 ⁽¹⁾	7.9 ⁽¹⁾	7.9 ⁽¹⁾	9.1 ⁽¹⁾	9.1 ⁽¹⁾	7.8 ⁽¹⁾	7.8 ⁽¹⁾	6.6 ⁽¹⁾	6.6 ⁽¹⁾
-6.0 m	A					8.1 ⁽¹⁾	7.3	7.2	5.3	5.6	4.1	4.5	3.3
-6.0 m	B					7.7 ⁽¹⁾	7.7 ⁽¹⁾	7.1 ⁽¹⁾	7.1 ⁽¹⁾	6.2 ⁽¹⁾	6.2 ⁽¹⁾	5.3 ⁽¹⁾	5.3 ⁽¹⁾
M330D Material Handler with a 10.2 m (33.5 ft) boom and a 8.2 m (26.9 ft) stick. 8300 kg counterweight All lifting capacities are in metric tons.
Radius		12.0 m		13.5 m		15.0 m		16.5 m		Maximum Reach
Radius		F	S	F	S	F	S	F	S	F	S	m
15.0 m	A	3.7 ⁽¹⁾	3.7 ⁽¹⁾
15.0 m	B	4.0 ⁽¹⁾	4.0 ⁽¹⁾
13.5 m	A	5.1 ⁽¹⁾	4.6
13.5 m	B	5.3 ⁽¹⁾	5.3 ⁽¹⁾	3.6 ⁽¹⁾	3.6 ⁽¹⁾
12.0 m	A	5.7	4.6	4.5	3.6
12.0 m	B	6.3 ⁽¹⁾	6.3 ⁽¹⁾	4.9 ⁽¹⁾	4.9 ⁽¹⁾
10.5 m	A	5.6	4.6	4.5	3.6	3.6	2.8
10.5 m	B	7.1 ⁽¹⁾	7.1 ⁽¹⁾	5.9 ⁽¹⁾	5.9 ⁽¹⁾	4.1 ⁽¹⁾	4.1 ⁽¹⁾
9.0 m	A	5.5	4.4	4.4	3.5	3.5	2.8			3.0	2.3	16.13
9.0 m	B	7.4 ⁽¹⁾	7.4 ⁽¹⁾	6.7 ⁽¹⁾	6.7 ⁽¹⁾	5.1 ⁽¹⁾	5.1 ⁽¹⁾			3.2	3.2	16.13
7.5 m	A	5.3	4.3	4.3	3.4	3.5	2.7	2.8	2.1	2.8	2.1	16.64
7.5 m	B	7.5 ⁽¹⁾	7.5 ⁽¹⁾	6.7 ⁽¹⁾	6.7 ⁽¹⁾	6.0 ⁽¹⁾	5.8	3.6 ⁽¹⁾	3.6 ⁽¹⁾	3.2	3.2	16.64
6.0 m	A	5.1	4.1	4.1	3.2	3.4	2.6	2.8	2.1	2.6	1.9	17.01
6.0 m	B	7.6 ⁽¹⁾	7.6 ⁽¹⁾	6.8 ⁽¹⁾	6.8 ⁽¹⁾	6.0 ⁽¹⁾	5.7	4.4 ⁽¹⁾	4.4 ⁽¹⁾	3.3	3.3	17.01
4.5 m	A	4.8	3.8	3.9	3.1	3.2	2.5	2.7	2.0	2.5	1.8	17.23
4.5 m	B	7.7 ⁽¹⁾	7.7 ⁽¹⁾	6.8 ⁽¹⁾	6.6	6.0 ⁽¹⁾	5.6	5.0 ⁽¹⁾	4.7	3.4	3.4	17.23
3.0 m	A	4.6	3.6	3.8	2.9	3.1	2.4	2.6	1.9	2.4	1.7	17.33
3.0 m	B	7.8 ⁽¹⁾	7.7	6.8 ⁽¹⁾	6.4	5.9 ⁽¹⁾	5.4	5.1 ⁽¹⁾	4.7	3.5	3.5	17.33
1.5 m	A	4.3	3.3	3.6	2.7	3.0	2.2	2.5	1.9	2.3	1.7	17.29
1.5 m	B	7.7 ⁽¹⁾	7.5	6.7 ⁽¹⁾	6.2	5.8 ⁽¹⁾	5.3	4.9 ⁽¹⁾	4.6	3.7	3.7	17.29
0.0 m	A	4.1	3.1	3.4	2.6	2.9	2.1	2.5	1.8	2.3	1.7	17.12
0.0 m	B	7.5 ⁽¹⁾	7.2	6.4 ⁽¹⁾	6.1	5.5 ⁽¹⁾	5.2	4.5 ⁽¹⁾	4.5	3.9	3.9	17.12
-1.5 m	A	3.9	2.9	3.3	2.5	2.8	2.1	2.4	1.8	2.4	1.7	16.82
-1.5 m	B	7.1 ⁽¹⁾	7.1	6.0 ⁽¹⁾	6.0	5.0 ⁽¹⁾	5.0 ⁽¹⁾	4.0 ⁽¹⁾	4.0	3.8	3.8	16.82
-3.0 m	A	3.8	2.8	3.2	2.4	2.8	2.0			2.4	1.8	16.37
-3.0 m	B	6.4 ⁽¹⁾	6.4 ⁽¹⁾	5.4 ⁽¹⁾	5.4 ⁽¹⁾	4.4 ⁽¹⁾	4.4 ⁽¹⁾			3.4	3.4 ⁽¹⁾	16.37
-4.5 m	A	3.8	2.8	3.2	2.3	2.8	2.0
-4.5 m	B	5.6 ⁽¹⁾	5.6 ⁽¹⁾	4.6 ⁽¹⁾	4.6 ⁽¹⁾	3.5 ⁽¹⁾	3.5 ⁽¹⁾
-6.0 m	A	3.7	2.8	3.2	2.3
-6.0 m	B	4.4 ⁽¹⁾	4.4 ⁽¹⁾	3.4 ⁽¹⁾	3.4 ⁽¹⁾

Show/hide table

^( 1 )

Capacity is limited by hydraulics rather than by a tipping load. The loads do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.