Fuel Tank - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 1 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the fuel tank. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Show/hide table
Illustration 1 g01277581 - Lower access panel (1).
Show/hide table
Illustration 2 g01277582 - Close fuel shutoff valve (3). Disconnect hose (2).
Show/hide table
Illustration 3 g01277589 - Remove panel (4).
Show/hide table
Illustration 4 g01277591 - Remove bolts (5) and step (6).
Show/hide table
Illustration 5 g01277596 Show/hide tableIllustration 6 g01277599 - Remove bolts (8) and (9). Remove hand rail (7).
Show/hide table
Illustration 7 g01277606 - Attach a suitable lifting device to panel assembly (10). The weight of panel assembly (10) is approximately
73 kg (160 lb) .Show/hide tableIllustration 8 g01277607 Show/hide tableIllustration 9 g01277608 - Open side door (11). Remove bolts (12) and (13). Remove panel assembly (10).
Show/hide table
Illustration 10 g01277609 - Disconnect hose (14) and harness assembly (15).
Show/hide table
Illustration 11 g01277626 Show/hide tableIllustration 12 g01277627 - Attach Tooling (A) and a suitable lifting device to fuel tank (16). The weight of fuel tank (16) is approximately
160 kg (353 lb) . - Remove bolts (17). Repeat for the other side. Remove fuel tank (16).
Caterpillar Information System:
330D and 336D Excavators Machine System Specifications Stick - 7.6 m (24.93 ft)
385B Excavator Hydraulic System Medium Pressure Hydraulic System - Calibrate
385B Excavator Hydraulic System Two-Way Hydraulic System - Calibrate
385B Excavator Hydraulic System One-Way Hydraulic System - Calibrate
385B Excavator Hydraulic System Auxiliary Valve Spool - Calibrate
325D Forest Machine Hydraulic System Travel on Level Ground - Test
330D MHPU Mobile Hydraulic Power Unit Engine Supplement Starting Aid (Air Inlet Heater) - Remove and Install - Engine In Chassis
330D MHPU Mobile Hydraulic Power Unit Engine Supplement Unit Injector Hydraulic Pump - Install
325D Forest Machine Hydraulic System Swing Speed and Overswing on Level Ground - Check
319D Excavator Joystick Controls Alternate Patterns
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Install
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Remove - In-Chassis
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Assemble
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Disassemble
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Install - In-Chassis
568 Forest Machine Machine System Specifications Heel Cylinder
324D and 325D Forest Machines Machine Systems Hydraulic Tank and Filter - Remove
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095} Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
324D and 325D Forest Machines Machine Systems Fuel Tank - Install
2006/06/26 The Lever Assembly for the Alarm Switch Is Improved {5051, 7429}
325D Forest Machine Hydraulic System Cylinder Drift - Check
345C Excavator Tool Control System System 1: One-Way/One Pump/Pedal
324D and 325D Forest Machines Machine Systems Oil Filter (Hydraulic, Return) - Remove