Stick - 7.6 m (24.93 ft)
Show/hide table
 | |
| Illustration 1 | g02634905 |
Show/hide table
| Specification for 272-8030 Stick , and 272-8040 Stick | |||
| Item | Qty | Part | Specification Description |
| All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the attachment, and the cylinder pin bores. | |||
| 1 | 2 | 228-5621 Bushing | Inside diameter before assembly is 120.32 ± 0.04 mm (4.737 ± 0.002 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 2 | As required, use the following shims to adjust a lateral clearance of 1.0 to 2.0 mm (0.04 to 0.08 inch): |
||
| 2 | 093-0090 Shim | Thickness is 1.0 mm (0.04 inch). |
|
| 2 | 7Y-3355 Shim | Thickness is 1.6 mm (0.06 inch). |
|
| 2 | 093-0122 Shim | Thickness is 2.0 mm (0.08 inch). |
|
| 3 | 2 | 166-1498 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. |
| 4 | 2 | 7X-4803 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. |
| 5 | 2 | 228-5615 Bushing | Inside diameter before assembly is 90.25 ± 0.04 mm (3.553 ± 0.002 inch). Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch). |
| 6 | 1 | 223-9975 Pin | Diameter is 99.85 ± 0.04 mm (3.931 ± 0.002 inch). |
Caterpillar Information System:
385B Excavator Hydraulic System Medium Pressure Hydraulic System - Calibrate
385B Excavator Hydraulic System Two-Way Hydraulic System - Calibrate
385B Excavator Hydraulic System One-Way Hydraulic System - Calibrate
385B Excavator Hydraulic System Auxiliary Valve Spool - Calibrate
325D Forest Machine Hydraulic System Travel on Level Ground - Test
330D MHPU Mobile Hydraulic Power Unit Engine Supplement Starting Aid (Air Inlet Heater) - Remove and Install - Engine In Chassis
330D MHPU Mobile Hydraulic Power Unit Engine Supplement Unit Injector Hydraulic Pump - Install
325D Forest Machine Hydraulic System Swing Speed and Overswing on Level Ground - Check
319D Excavator Joystick Controls Alternate Patterns
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Ejector Control Valve
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Swivel - Install
319D Excavator Monitoring System
324D and 325D Forest Machines Machine Systems Fuel Tank - Remove
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Remove - In-Chassis
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Assemble
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Disassemble
390D Excavator Machine Systems Check Valve (Cooler Bypass) - Install - In-Chassis
568 Forest Machine Machine System Specifications Heel Cylinder
324D and 325D Forest Machines Machine Systems Hydraulic Tank and Filter - Remove
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095} Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
324D and 325D Forest Machines Machine Systems Fuel Tank - Install
2006/06/26 The Lever Assembly for the Alarm Switch Is Improved {5051, 7429}
325D Forest Machine Hydraulic System Cylinder Drift - Check
345C Excavator Tool Control System System 1: One-Way/One Pump/Pedal