Inlet and Exhaust Valve Seat Inserts - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 166-7441     | Valve Seat Extractor Tool Group     | 1     |
6V-4196 | Inlet Valve Seat Extractor (1)     | 1     | |
6V-4195 | Exhaust Valve Seat Extractor (1)     | 1     | |
6V-4804 | Handle Assembly (1)     | 1     |
Show/hide table
( 1 ) | This tool is included in the 166-7441 Valve Seat Extractor Tool Group . |
Start By:
- Remove the inlet valves and the exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tool (A) with appropriate extractor (1) in order to remove valve seat inserts.
Show/hide table
Illustration 1 | g00545912 |
Show/hide table
Illustration 2 | g00702922 |
- Repeat the procedure for the remaining valve seat inserts.
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | FT-2714     | Valve Seat Driver (Inlet)     | 1     |
FT-2715 | Valve Seat Driver (Exhaust)     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 3 | g00702994 |
- Use the appropriate parts of Tool (A) in order to install the valve seat insert into the cylinder head assembly.
- Repeat the procedure for the remaining valve seat inserts.
Note: Refer to the Specifications Module for more information on the valve seat inserts.
End By: Install the inlet valves and the exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Caterpillar Information System:
325, 325B and 325L Excavators Final Drive
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-7208</B> Generator through <B>5N-7232</B> Generator
3034 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines Gear Group (Front) - Time
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>129-1502</B> Generator through <B>129-5034</B> Generator
TK711, TK721, TK722 and TK732 Track Feller Bunchers Crushing Prevention and Cutting Prevention
2000/04/01 New Expansion Tank is now Available {1354}
2000/05/01 Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
2001/05/01 Image Gallery CD-ROM Is Now Available For The Caterpillar HEUI HI300 And EUI Fuel Systems {1250}
2000/04/01 Image Gallery CD-ROM Is Now Available For The Caterpillar HEUI HI300 And EUI Fuel Systems {1250}
3114, 3116, and 3126 Engines Unit Injector Synchronization - Adjust
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options Selection Guide for Voltage Regulator (SR4B for 3500 Engines)
3114, 3116, and 3126 Engines for Caterpillar Built Machines Inlet Manifold - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Inlet Manifold - Install
325, 325B and 325L Excavators Final Drive
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-7233</B> Generator through <B>5N-7309</B> Generator
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module System Overview
2000/09/11 Use 159-9404 Counterbore Tool Group In Order to Bore Cylinder Block {0705, 1000}
C-10 and C-12 Industrial Engines Piston and Rings
2000/05/01 Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application PTO Shutdown Timer - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Burn Prevention
TK711, TK721, TK722 and TK732 Track Feller Bunchers Track Information
P16, P20, P25, P28, P40 and P60 Pulverizer Burn Prevention