Inlet Manifold - Install
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将新的密封垫 (6) 安装到缸盖上。
Show/hide table
 | |
| 图 1 | g00675794 |
- 将进气歧管 (5) 安置在发动机上。
Show/hide table
 | |
| 图 2 | g00629952 |
- 安装螺栓 (4) 。 拧紧螺栓至扭矩为 28 ± 7 N·m (21 ± 5 lb ft)。
- 将进气弯头 (2) 安装在进气歧管 (5) 上。
- 安装螺栓 (1) 并连接进气加热器电磁阀 (3) 。
End By: 安装气门机构盖。 请参阅 拆解和组装, "气门机构盖 - 拆卸和安装"。
Caterpillar Information System:
3114, 3116, and 3126 Engines for Caterpillar Built Machines Inlet Manifold - Remove
3034 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
325, 325B and 325L Excavators Final Drive
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-7208</B> Generator through <B>5N-7232</B> Generator
3034 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines Gear Group (Front) - Time
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>129-1502</B> Generator through <B>129-5034</B> Generator
TK711, TK721, TK722 and TK732 Track Feller Bunchers Crushing Prevention and Cutting Prevention
2000/04/01 New Expansion Tank is now Available {1354}
2000/05/01 Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
2001/05/01 Image Gallery CD-ROM Is Now Available For The Caterpillar HEUI HI300 And EUI Fuel Systems {1250}
2000/04/01 Image Gallery CD-ROM Is Now Available For The Caterpillar HEUI HI300 And EUI Fuel Systems {1250}
325, 325B and 325L Excavators Final Drive
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-7233</B> Generator through <B>5N-7309</B> Generator
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module System Overview
2000/09/11 Use 159-9404 Counterbore Tool Group In Order to Bore Cylinder Block {0705, 1000}
C-10 and C-12 Industrial Engines Piston and Rings
2000/05/01 Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application PTO Shutdown Timer - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Burn Prevention
TK711, TK721, TK722 and TK732 Track Feller Bunchers Track Information
P16, P20, P25, P28, P40 and P60 Pulverizer Burn Prevention
G3300 Engines Burn Prevention
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>130-0234</B> Generator through <B>130-7595</B> Generator