Hydraulic System Oil Filter (Return) - Replace
Show/hide table
 | |
| 图 1 | g01948830 |
- 将机器停放在水平地面上。 将铲斗降到地面，斗杆处于垂直位置。
- 从液压油箱的顶部卸下螺栓 (1) 、垫圈 (2) 和检修盖 (3) 。
Show/hide table
 | |
| 图 2 | g01147858 |
(1) 螺栓 (2) 垫圈 (3) 外盖 | |
- 彻底清洁四周，以使回油滤清器盖和压力盖无尘土。
Show/hide table
 | |
| 图 3 | g00741014 |
- 拧松压力盖释放液压油箱内的压力。 压力释放后，卸下压力盖。
- 卸下螺栓 (5) 、垫圈 (6) 和检修盖 (4) 。
Show/hide table
 | |
| 图 4 | g01147916 |
(4) 外盖 (5) 螺栓 (6) 垫圈 (7) 阀门 (8) 弹簧 (9) 滤芯 (10) O 形密封圈 | |
- 从油箱卸下弹簧 (8) 、阀 (7) 和滤芯 (9) 。
- 检查 O 形密封圈 (10) 。 如果 O 形密封圈有明显的磨损或损坏，应进行更换。
- 将新滤芯 (9) 装到油箱中。 阀门 (7) 和弹簧 (8) 也要装到油箱上。
- 装上检修盖 (4) 、垫圈 (6) 和螺栓 (5) 。
- 清洁压力盖并安装压力盖。
- 用螺栓 (1) 和垫圈 (2) 安装检修盖 (3) 。
Caterpillar Information System:
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Lifting and Tying Down
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Transport Position
305.5 Mini Hydraulic Excavator Hydraulic System Oil - Change
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Operation
305.5 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
305.5 Mini Hydraulic Excavator Fuel System Water Separator - Drain - If Equipped
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Work Tool Installation and Removal
M325D Material Handler Machine Systems Upper Frame and Undercarriage Frame - Connect
305.5 Mini Hydraulic Excavator Fuel System Priming Pump Strainer - Clean
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Black Smoke
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Approved Machines
302.5C Mini Hydraulic Excavator Machine System Specifications Swing Motor
305.5 Mini Hydraulic Excavator Hydraulic System Oil Level - Check
345C Excavator Tool Control System System 5: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
2005/05/09 An Improved Travel Counterbalance Valve Prevents Oil Leaks from the Plugs {5811}
305.5 Mini Hydraulic Excavator Hydraulic System Oil Sample - Obtain
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Cutters - Inspect/Replace
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
305.5 Mini Hydraulic Excavator Indicators and Gauges - Test
305.5 Mini Hydraulic Excavator Radiator Core - Clean
345C Excavator Tool Control System System 5: Default Value of Work Tool Parameters
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Electrical Power Supply Circuit - Test
2005/03/07 260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
345C Excavator Tool Control System Service Mode - Enter