Transport Position
Show/hide table
| 注意 |
|---|
关于主机的具体信息，请参见主机《操作和保养手册》。 |
注: 仅使用转轴锁定装置传送剪具。
Show/hide table
 | |
| 图 1 | g01652493 |
Show/hide table
 | |
| 图 2 | g01444357 |
当在主机上传送剪具时，定位剪具，使斗杆可在动臂下移动，且动臂可尽量下行。
当必须在其他车辆上传送剪具时，应闭合剪夹钳。 将剪具平放在车辆底板上。
剪具配备有锁定装置 (1) 以便锁定转轴。 锁定装置 (1) 可防止上壳体在传送剪具时出现移动。 下图显示每种机型的锁定装置 (1) 的位置。
旋转剪具直到对齐转轴的锁定装置。 安装转轴的锁定装置 (1) 。 闭合剪夹钳。
Show/hide table
 | |
| 图 3 | g01722093 |
S320B 和 S325B 转轴锁定装置 | |
Show/hide table
 | |
| 图 4 | g01722097 |
S340B 转轴锁定装置 | |
Show/hide table
 | |
| 图 5 | g01444317 |
S365B 和 S385B 转轴锁定装置 | |
注: 操作剪具前，必须拆下锁定装置 (1) 。
Caterpillar Information System:
305.5 Mini Hydraulic Excavator Hydraulic System Oil - Change
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Operation
305.5 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
305.5 Mini Hydraulic Excavator Fuel System Water Separator - Drain - If Equipped
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Work Tool Installation and Removal
M325D Material Handler Machine Systems Upper Frame and Undercarriage Frame - Connect
305.5 Mini Hydraulic Excavator Fuel System Priming Pump Strainer - Clean
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Black Smoke
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Approved Machines
302.5C Mini Hydraulic Excavator Machine System Specifications Swing Motor
305.5 Mini Hydraulic Excavator Fuel System - Prime
345B Series II Excavator Stopping the Engine
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Lifting and Tying Down
305.5 Mini Hydraulic Excavator Hydraulic System Oil Filter (Return) - Replace
305.5 Mini Hydraulic Excavator Hydraulic System Oil Level - Check
345C Excavator Tool Control System System 5: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
2005/05/09 An Improved Travel Counterbalance Valve Prevents Oil Leaks from the Plugs {5811}
305.5 Mini Hydraulic Excavator Hydraulic System Oil Sample - Obtain
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Cutters - Inspect/Replace
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
305.5 Mini Hydraulic Excavator Indicators and Gauges - Test
305.5 Mini Hydraulic Excavator Radiator Core - Clean
345C Excavator Tool Control System System 5: Default Value of Work Tool Parameters
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Electrical Power Supply Circuit - Test