Fuel Tank Water and Sediment - Drain
Show/hide table
 | |
| 图 1 | g01147824 |
注: 参阅操作和保养手册, "一般危险事项"中关于盛装溢出液体的资料。
注: 根据当地法规废置排放出来的机油。
- 关闭排放阀。
加注燃油箱
必要时，您现在可以向燃油箱加注燃油。 卸下燃油箱盖并通过加油口泵入燃油。
加油结束后，确保燃油箱盖锁好。
Caterpillar Information System:
305.5 Mini Hydraulic Excavator Fuel System Water Separator - Drain - If Equipped
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Work Tool Installation and Removal
M325D Material Handler Machine Systems Upper Frame and Undercarriage Frame - Connect
305.5 Mini Hydraulic Excavator Fuel System Priming Pump Strainer - Clean
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Black Smoke
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Approved Machines
302.5C Mini Hydraulic Excavator Machine System Specifications Swing Motor
305.5 Mini Hydraulic Excavator Fuel System - Prime
345B Series II Excavator Stopping the Engine
305.5 Mini Hydraulic Excavator Fuel System Filter - Replace
305.5 Mini Hydraulic Excavator Engine Oil and Filter - Change
305.5 Mini Hydraulic Excavator Engine Oil Sample - Obtain
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Operation
305.5 Mini Hydraulic Excavator Hydraulic System Oil - Change
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Transport Position
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Lifting and Tying Down
305.5 Mini Hydraulic Excavator Hydraulic System Oil Filter (Return) - Replace
305.5 Mini Hydraulic Excavator Hydraulic System Oil Level - Check
345C Excavator Tool Control System System 5: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
2005/05/09 An Improved Travel Counterbalance Valve Prevents Oil Leaks from the Plugs {5811}
305.5 Mini Hydraulic Excavator Hydraulic System Oil Sample - Obtain
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Cutters - Inspect/Replace
C27 and C32 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
305.5 Mini Hydraulic Excavator Indicators and Gauges - Test