- Excavator:
- All
- Pipelayer:
- All
- Track-Type Loader:
- All
- Track-Type Skidder:
- All
- Track-Type Tractor:
- All
- All
Illustration 1 | g01078313 |
The Cat Track Torque Wrench removes the track bolts during disassembly of the track for reconditioning. The Cat Track Torque Wrench also installs the track bolts during assembly of the track.
A programmable logic control allows the Cat Track Torque Wrench to perform Caterpillar's torque turn procedure. The Cat Track Torque Wrench tightens the bolts to a specific torque plus an additional 120 degrees. For a competitive track, the Cat Track Torque Wrench can tighten the bolts to the final torque setting that is recommended for a specific track.
The Cat Track Torque Wrench rides along the rails of a conveyor in order to get into position for the operation. The operator controls all travel and torquing functions with a joystick.
Features and Benefits
- A maximum torque of 9520 N·m (7000 lb ft) can be applied while the spindle is turning up to 40 rpm. A lower torque of 1496 N·m (1100 lb ft) can be applied while the spindle is turning from 41 to 195 rpm.
- A load cell senses the applied torque. The load cell is mounted 305 mm (12 inch) from the centerline of the bearing for the turntable.
- The Cat Track Torque Wrench uses pumps that can sense the load. Also, the pumps can limit the horsepower.
- A variable displacement, fluid motor provides smooth, quiet shifting in comparison with mechanical shifters. The result is reduced wear, maintenance and downtime.
- A hydraulic oil cooler ensures cooler operation.
- The Cat Track Torque Wrench is designed and manufactured by Cat Dealer Service Tools.
- The hydraulic pump and the hydraulic motor have Cat part numbers for easy ordering through the Caterpillar parts department.
- The Cat Track Torque Wrench can be ordered in electrical configurations of 380, 460, or 575 volts and 50 or 60 Hz.
- The machine is European Union compliant.
Related Tools (available separately)     | |||||
Pt. No.     | Description     | Size     | |||
4C-8207     | Nut Wrench As     | 1.51 and 1.32 inch     | |||
4C-8208     | Nut Wrench As     | 1.27 and 1.19 inch     | |||
4C-8209     | Nut Wrench As     | 1.15 and 1.03 inch     | |||
4C-8210     | Nut Wrench As     | 1.00 and 0.89 inch     | |||
188-0956     | Nut Wrench As     | 42 and 32 mm     | |||
188-0959     | Nut Wrench As     | 30 and 25 mm     | |||
Conveyor 15.25 m (50 foot) includes hydraulically activated track shoe lifter and 1.5 mm (5 foot) ramp. The conveyor must be ordered directly from Dealer Service Tools.     |
|||||
Caterpillar 300 ton or 375 ton Track Press. The track presses must be ordered directly from Dealer Service Tools.     | |||||
Impact Sockets for Track Rollers     | |||||
Inch     | mm     | Pt. No.     | Description     | Drive     | Model     |
    | 19     | 1U-7626     | tapered     | 1 in square     | E70, 307     |
3/4     |     | 221-4352 (1)     | thin wall     | 0.75 inch square     | E70, 307     |
27/32     |     | 6V-7929     | thin wall     | 1 inch square     | D4. D3. 941, 933, 931 with worn bolts     |
    | 22     | 1U-7627     | tapered     | 1 inch square     | E90     |
7/8     |     | 221-4353 (1)     | thin wall     | 0.75 inch square     | E90     |
7/8     |     | 9S-6375     | thin wall     | 1 inch square     | D4, D3, 941, 933, 931     |
29/32     |     | 6V-7928     | thin wall     | 1 inch square     | D4, 955, 953, 951, 943, 941, 225, 215 with worn bolts     |
29/32     |     | 6V-2002     | standard     | 1 inch square     | D4H, D5, D5H, D6 with worn bolts     |
15/16     |     | 221-4354 (1)     | thin wall     | 0.75 inch square     | E110, E120, E140, 311, 312     |
15/16     |     | 9S-6374     | thin wall     | 1 inch square     | D4, 941, 943, 951, 955, 215, 225     |
15/16     |     | 9S-6370     | standard     | 1 inch square     | D4H, D5, D5H, D6     |
    | 24     | 1U-7628     | tapered     | 1 inch Square     | E110, E120, E140, 311, 312     |
1 1/16     |     | 221-4355 (1)     | thin wall     | 0.75 inch Square     | E(L)180, E(L)200, E(L)240, E300     |
    | 27     | 1U-7629     | tapered     | 1 inch Square     | E(L)180, E(L)200, E(L)240, E300     |
1 3/32     |     | 5P-3579     | standard     | 1 inch Square     | D6, D6H, D7, D7H, 963 with worn bolts     |
1 1/8     |     | 9S-6369     | thin wall     | 1 inch Square     | 955, 977, 235     |
1 1/8     |     | 9S-6373     | standard     | 1 inch Square     | D6, D6H, D7, D7H, 963     |
    | 30     | 1U-7630     | tapered     | 1 inch Square     | EL300, 320, 325     |
1 3/16     |     | 221-4356 (1)     | thin wall     | 0.75 inch square     | EL300, 320, 325     |
1 1/4     |     | 221-4357 (1)     | thin wall     | 0.75 inch Square     | E450, E650, 330, 350     |
    | 32     | 1U-7631     | tapered     | 1 inch Square     | E450, E650, 330, 350     |
1 9/32     |     | 5P-3580     | standard     | 1 inch Square     | D8, D8L, D8N, 973, 983 with worn bolts     |
1 5/16     |     | 9S-6372     | standard     | 1 inch Square     | D8, D8L, D8N, 973, 983     |
1 15/32     |     | 5P-3581     | standard     | 1 inch Square     | D9, D9L, D9N, 245 with worn bolts     |
1 1/2     |     | 9S-6371     | standard     | 1 inch Square     | D9, D9L, D9N, 245     |
1 5/8     |     | 1U-8798     | tapered     | 1.5 inch Square     | D10, D10N with worn bolts; 375, 5080     |
1 11/16     |     | 1U-8586     | tapered     | 1.5 inch Square     | D10, D10N     |
2     |     | 8T-9175     | standard     | 1.5 inch Square     | D11N with worn bolts     |
2 1/16     |     | 8T-9174     | standard     | 1.5 inch Square     | D11N, 5130     |
( 1 ) | Do not use this socket on standard impact wrenches. |
Reference Materials     | |
Media No.     | Description     |
NEHS0830     | Tool Operating Manual -- "Caterpillar Track Torque Wrench"     |
NEHS0802     | Tool Operating Manual -- "Caterpillar Track Press Introduction"     |
RENR3965     | Wall Chart--" Adjustment, Setup and Operation of Cat Track Torque Wrench"     |
The Cat Track Torque Wrench must be purchased outside of the Caterpillar Parts Department with a purchase order. For additional information, for quotations and specifications, or for orders, contact one of the sources which follow:
NACD, LACDJohn Jordan
8900 N. Pioneer Road
Peoria, IL U.S.A.61615-1522
Jordan_John_A@cat.com
Telephone: 309-636-1791Fax: 309-636-1664
or
APD, EAME, SCMAllan Teuerle
8900 N. Pioneer Road
Peoria, IL U.S.A 61615-1522
Teuerle_Allan_R@cat.com
Telephone: 309-636-1677Fax: 309-636-1664
or
HotlineSue Hughes
Dealer Service Tools
501 S.W. Jefferson Avenue
Peoria, IL 61630-2184
CSTG_Hotline@cat.com
USA: 1-800-542-8665Illinois: 1-800-541-8665Canada: 1-800-523-8665World: 1-309-675-6277Fax: 1-309-494-1475