Electronic Control System Operation
Show/hide table
| |
| Illustration 1 | g00825052 |
|
Electronic control system (typical example) | |
Various sensors feed engine data to the electronic control module (ECM). The ECM processes this data. The ECM sends electronic signals to the fuel injector solenoids. The solenoids are energized in order to start the fuel discharge from the fuel injectors. The solenoids are de-energized in order to stop the fuel discharge from the fuel injectors. Refer to Systems Operation, "Electronic Fuel Injector" for a complete explanation of the fuel injection process.
Caterpillar Information System:
320B Excavator Hydraulic System Hydraulic System Pressure - Release
3500B Industrial Engines Permanent Timing Calibration Sensor
G3500 Industrial Engines Inspecting Electrical Connectors
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Ether Injection System
3608 Engine Measuring Engine Oil Pressure
G3500 Industrial Engines Detonation Retard and Detonation Shutdown
3608 Engine Lubrication Metering Pump for the Inlet Valve
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 04 Engine Oil Pressure short to ground
3500B Industrial Engines Engine Speed/Timing Sensor
3114, 3116 and 3126 MUI Engine Governors Governor (Type V) - Adjust
2000/05/01 New Water Lines Groups Include New Bellows Assemblies With Flange Couplings {1380}
3512B Petroleum Engines Cat Data Link
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Engine Wiring Harness Diagram
G3500 Industrial Engines DDT Troubleshooting
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Start/Run/Stop Switch
G3500 Industrial Engines Electrical Power Supply
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561} Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Overspeed Verify Switch
3524B Engines for Off-Highway Trucks Analog Sensor - Calibrate
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor - Calibrate
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Air Shutoff System
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner - Remove and Install
G3500B Engines Fuel System Operation