3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Caterpillar


CID 0100 FMI 03 Engine Oil Pressure open/short to +batt

Usage:

988G 2TW
Conditions Which Generate This Code:

The Electronic Control Module (ECM) detects a signal voltage from the oil pressure sensor that is greater than 4.8 volts.

System Response:

The ECM flags oil pressure as invalid data and a default value of 600 kPa (87 psi) is used.

Troubleshooting:

Test Step 1.

Results:

  • OK - STOP

Caterpillar Information System:

3512B Engine for SPF343, SPS343, and SPT343 Pumpers Ether Injection System
3608 Engine Measuring Engine Oil Pressure
G3500 Industrial Engines Detonation Retard and Detonation Shutdown
3608 Engine Lubrication Metering Pump for the Inlet Valve
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 04 Engine Oil Pressure short to ground
3500B Industrial Engines Engine Speed/Timing Sensor
3114, 3116 and 3126 MUI Engine Governors Governor (Type V) - Adjust
2000/05/01 New Water Lines Groups Include New Bellows Assemblies With Flange Couplings {1380}
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Shipping the Machine
3500B Marine Engines Engine Sensor Open/Short Test
G3500 Industrial Engines Detonation Sensors
1999/12/01 Change to Tightening Procedure for Cylinder Head Bolts in Disassembly and Assembly, RENR1318 {1100}
G3500 Industrial Engines Inspecting Electrical Connectors
3500B Industrial Engines Permanent Timing Calibration Sensor
320B Excavator Hydraulic System Hydraulic System Pressure - Release
3512B Petroleum Engines Electronic Control System Operation
3512B Petroleum Engines Cat Data Link
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Engine Wiring Harness Diagram
G3500 Industrial Engines DDT Troubleshooting
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Start/Run/Stop Switch
G3500 Industrial Engines Electrical Power Supply
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561} Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Overspeed Verify Switch
3524B Engines for Off-Highway Trucks Analog Sensor - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.