MID 036 - CID 0547 - FMI 05 Ether Injection Lamp open circuit
Conditions Which Generate This Code:
The ECM has been powered for three seconds. The ECM has detected an open circuit in the Lamp circuit for the Starting Aid Switch for 1.9 seconds. Battery voltage is less than 9 VDC for the last 2 seconds.
System Response:
The CID-FMI is logged in memory. The CID-FMI may be viewed on a display module or the ET.
Test Step 1. Perform the following test: Starting Aid Lamp Circuit - Test
Results:
- OK - Stop.
- REPAIRED, OK - Stop.
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Fuel System Pressure - Test
312C Excavator 3064 Engine Supplement Air Cleaner - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Fuel System - Prime
325C and 325C L Excavator Bucket Linkage (C Family) - Lubricate
305.5 Mini Hydraulic Excavator Machine System Specifications Pilot Valve - Auxiliary
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3064 and 3066 Engines for Caterpillar Built Machines High Idle RPM - Adjust
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
2001/09/04 A New Gasket For The Radiator Is Available {1353}
3064 and 3066 Engines for Caterpillar Built Machines Low Idle RPM - Adjust
2001/07/30 Special Instruction, REHS1040 , "Procedure for the Repair of Compensator Valves in the Main Hydraulic Control Valve" is Available {5051}
3064 and 3066 Engines for Caterpillar Built Machines Governor - Adjust - In-line Fuel Pump
3064 and 3066 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
3064 and 3066 Engines for Caterpillar Built Machines Turbocharger - Inspect
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0547 - FMI 06 Ether Injection Lamp short to ground
303.5C CR and 303C CR Mini Hydraulic Excavators Machine System Specifications Joystick Control
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
3064 and 3066 Engines for Caterpillar Built Machines Exhaust Temperature - Test
3064 and 3066 Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
3064 and 3066 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
3064 and 3066 Engines for Caterpillar Built Machines Valve Guide - Inspect
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0580 - FMI 03 Power Shift Pres Sensor open/short to +batt
305.5 Mini Hydraulic Excavator Machine System Specifications Control Manifold (Pilot Oil)
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0580 - FMI 04 Power Shift Pres Sensor short to ground