325C and 325C L Excavator Caterpillar


Bucket Linkage (C Family) - Lubricate

Usage:

325C AMH
Catatan: Caterpillar merekomendasikan penggunaan gemuk pelumas dengan kandungan 5 molybdenum untuk pelumasan persambungan kontrol boom, stick dan bucket. Gunakan petunjuk pada Publikasi Khusus, SEBU6250, "Rekomendasi Cairan untuk Machine Caterpillar" untuk mendapatkan informasi lebih terperinci mengenai gemuk pelumas molybdenum.

Bersihkan semua fiting sebelum melakukan pelumasan.




Ilustrasi 1g00750605

Catatan: Isi semua rongga pada persambungan kontrol bucket dengan gemuk pelumas saat permulaan pemasangan bucket.

  1. Berikan pelumasan melalui fiting untuk persambungan (1), (2), (3) dan (4) .

  1. Berikan pelumasan melalui fiting untuk bucket (5), (6) dan (7) .

Catatan: Lakukan servis pada fiting-fiting di atas setelah mengoperasikan bucket di dalam air.

Caterpillar Information System:

305.5 Mini Hydraulic Excavator Machine System Specifications Pilot Valve - Auxiliary
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0542 - FMI 04 Unfiltered Engine Oil Pressure short to ground
3064 and 3066 Engines for Caterpillar Built Machines High Idle RPM - Adjust
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
2001/09/04 A New Gasket For The Radiator Is Available {1353}
3064 and 3066 Engines for Caterpillar Built Machines Low Idle RPM - Adjust
2001/07/30 Special Instruction, REHS1040 , "Procedure for the Repair of Compensator Valves in the Main Hydraulic Control Valve" is Available {5051}
3064 and 3066 Engines for Caterpillar Built Machines Governor - Adjust - In-line Fuel Pump
325C and 325C L Excavator Hydraulic System Oil Filter (Pilot) - Replace
305 CR Mini Hydraulic Excavator Machine System Specifications Blade Mounting
325C and 325C L Excavator Hydraulic System Oil Filter (Case Drain) - Replace
Starting Motor Solenoid - Replace {1467} Starting Motor Solenoid - Replace {1467}
3064 and 3066 Engines for Caterpillar Built Machines Fuel System - Prime
312C Excavator 3064 Engine Supplement Air Cleaner - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Fuel System Pressure - Test
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0547 - FMI 05 Ether Injection Lamp open circuit
3064 and 3066 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
3064 and 3066 Engines for Caterpillar Built Machines Turbocharger - Inspect
3500B Engines for 5130B and 5230B Excavators MID 036 - CID 0547 - FMI 06 Ether Injection Lamp short to ground
303.5C CR and 303C CR Mini Hydraulic Excavators Machine System Specifications Joystick Control
HDB Series and M1 Series Heavy Duty Brushless Alternators Normal Operation
3064 and 3066 Engines for Caterpillar Built Machines Exhaust Temperature - Test
3064 and 3066 Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
3064 and 3066 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.