 | |
| Illustration 1 | g01147898 |
(1) Upward key (2) Right key (3) Set key (4) Menu key (5) Left key (6) Downward key (7) Cancel key (8) OK key | |
 | |
| Illustration 2 | g00812524 |
- Press up key (1) or press down key (6) in order to highlight the "SERVICE OPTIONS" menu. Press OK key (8). The "SERVICE OPTIONS" menu will appear.
 | |
| Illustration 3 | g00813299 |
"MACHINE INFO"
 | |
| Illustration 4 | g00813312 |
Press up key (1) or press down key (6) in order to highlight the "MACHINE INFO" menu. Press OK key (8).
 | |
| Illustration 5 | g00813318 |
Different machine information will appear. Press right key (2) or left key (5) in order to scroll through the available service items. The following information is located in this menu: "MACHINE CONTR.""ENGINE CONTR.""MONITOR""SOFT-SWITCH-PANEL".
The "MACHINE CONTR." shows the following information about the machine ECM: part number, serial number and software version.
The "ENGINE CONTR." shows the following information about the engine ECM: part number, serial number and software version.
The "MONITOR" shows the following information about the monitor: part number, serial number and software version.
The "SWITCH PANEL" shows the following information about the switch panel: part number, serial number and software version.
"OPERATING HOURS"
| | |
| Illustration 6 | g00813312 |
Press the down key (6) until "OPERATING HOURS" is highlighted. Press the OK key (8).
 | |
| Illustration 7 | g00835119 |
Operating hours can be viewed on the following displays:Engine ECM, Machine ECM, Monitor, Switch Panel, Travel, Swing, Tool Number 1, Tool Number 2, Tool Number 3, Tool Number 4 and Tool Number 5. Press right key (2) or left key (5) in order to scroll through the available service items.
"TOOL INDICATOR"
 | |
| Illustration 8 | g00835402 |
Press the down key (6) until "TOOL INDICATOR" is highlighted. Press the OK key (8). Select the "ENABLE" option so the monitor displays the tool that is active on the machine. Select the "DISABLE" option so the monitor does not display the active tool. The default display is the display with the clock. Press the set key (3) in order to save the setting.