Check Engine Lamp or Warning Lamp Is Malfunctioning
- 灯泡烧坏
- 指示灯电路有问题
- 传动系数据链路上的系统
参见故障诊断与排除, "检查发动机指示灯电路 - 测试"。
参见故障诊断与排除, "报警灯电路 - 测试"。
与传动系数据链路相连的系统可能会点亮指示灯。 这些系统包括制动、变速箱和/或驾驶室控制。
注: 你需要特殊的维修工具来监控 J1939 数据链路上的模块。
在可能的情况下,获得必要的设备。 当车辆出现问题时监控适当的参数。 确定状况是否为正常运转。 如果不是正常运转,请参阅车辆的原始设备制造商 (OEM)。
Caterpillar Information System:
3056 Engine for Caterpillar Built Machines Connecting Rod Bearings - Install
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Before Starting Engine
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump - Remove - 3013, 3014, and 3024 Engines
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Water Pump - Install - 3013, 3014, and 3024 Engines
3512B Marine Auxiliary Engines Air Shutoff - Remove and Install
C-15, C-16, and C-18 Truck Engines Front Housing and Covers
C-15 and C-16 Industrial Engines Cylinder Liner
SR4 and SR4B Electric Power Generation Rewind Data Generator Identification
C-15, C-16, and C-18 Truck Engines Cylinder Block
3406E Truck Engine Engine Oil Pan
3003, 3013, 3014 and 3024 Industrial Engines Fuel System - Prime
3406E Truck Engine Compression Brake - If Equipped
793C and 793C XQ Off-Highway Truck Power Train Bypass Switch (Torque Converter Screen)
C-9 Engines for Caterpillar Built Machines Cooling System - Check - Overheating
C-9 Engines for Caterpillar Built Machines Cooling System - Test
C-9 Engines for Caterpillar Built Machines Water Pump - Test
3003, 3013, 3014 and 3024 Industrial Engines Cold Weather Starting
G3612 and G3616 Engines Actuator Position Sensor (Hydrax) - Remove and Install
3406E Truck Engine Flywheel Housing
3406E, C-10 and C-12 On-highway Engines Engine Will Not Crank
G3606 and G3608 Engines Hydraulic Accumulator and Filter (Hydrax) - Remove and Install
Caterpillar Monitoring System for Electronic Modular Control Panel Units Mode
Caterpillar Monitoring System for Electronic Modular Control Panel Warning Operation
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Engine Cranks but Will Not Start