Voltmeter
Usage:
4N7349 (AC No. 6474093)
With part number on meter horizontal and after a minimum of 5 minutes connected to 26 V:
Pointer must be within calibration bracket at (B) at ... 22 ± .1 V
Pointer must be within calibration bracket at (A) at ... 30 ± .1 V
Caterpillar Information System:
5.4" BORE, 60 V12 VEHICULAR ENGINE Shut-Off Solenoids
5.4" BORE, 60 V12 VEHICULAR ENGINE Starter Magnetic Switches
5.4" BORE, 60 V12 VEHICULAR ENGINE Starter Solenoids
5.4" BORE, 60 V12 VEHICULAR ENGINE Starting Motors - 7L8797, 4N8118
5.4" BORE, 60 V12 VEHICULAR ENGINE Starting Motors - 5L3648, 4N3349
5.4" BORE, 60 V12 VEHICULAR ENGINE Alternators
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing Bore
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing
5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel
5.4" BORE, 60 V12 VEHICULAR ENGINE Engine Support For 992, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE V-Belt Tension Chart
Installation Procedure For The 138-7020 Harness Assembly{1408} Installation Procedure For The 138-7020 Harness Assembly{1408}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250} Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Generator Set Start-up Checklist{1021, 1404, 7002} Generator Set Start-up Checklist{1021, 1404, 7002}
Installing the Air Inlet Heater System{1090} Installing the Air Inlet Heater System{1090}
Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451} Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}
Repair Procedure: 3600 Series Cylinder Heads - Blended Fuel{1100} Repair Procedure: 3600 Series Cylinder Heads - Blended Fuel{1100}
PTO Installation And Applications Instruction{1165} PTO Installation And Applications Instruction{1165}
Conversion Of Generators From Self-Excited To Permanent Magnet{4450} Conversion Of Generators From Self-Excited To Permanent Magnet{4450}
Installation Procedure For The 136-4304 Wiring Harness Assembly{1090} Installation Procedure For The 136-4304 Wiring Harness Assembly{1090}
Improved Straight-Faced Wiper Seals{7555, 7562} Improved Straight-Faced Wiper Seals{7555, 7562}
WOODWARD REPAIR MANUAL FOR DIASSEMBLY AND REASSEMBLY PROCEDU Chapter 1. 120 mm Throttle Valve with Actuator Parts