5.4" BORE, 60 V12 VEHICULAR ENGINE Caterpillar

Starter Magnetic Switches

Usage:

7M4291 12-24V (Delco-Remy Number 1119866) 9F3099 24V (Delco-Remy Number 0001481)

Current consumption (draw) both windings at 24 V ... .83 to .89 A

(1) Torque for large terminal nuts ... 35 ± 5 lb. in.(4 ± 1 N·m)

Caterpillar Information System:

5.4" BORE, 60 V12 VEHICULAR ENGINE Starter Solenoids

5.4" BORE, 60 V12 VEHICULAR ENGINE Starting Motors - 7L8797, 4N8118

5.4" BORE, 60 V12 VEHICULAR ENGINE Starting Motors - 5L3648, 4N3349

5.4" BORE, 60 V12 VEHICULAR ENGINE Alternators

5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing Bore

5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing Runout

5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Runout

5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel Housing

5.4" BORE, 60 V12 VEHICULAR ENGINE Flywheel

5.4" BORE, 60 V12 VEHICULAR ENGINE Engine Support For 992, 776, 777

5.4" BORE, 60 V12 VEHICULAR ENGINE Vibration Damper (2N7221 and 4N4416)

5.4" BORE, 60 V12 VEHICULAR ENGINE Vibration Damper (5S3419 and 2S712)

5.4" BORE, 60 V12 VEHICULAR ENGINE Shut-Off Solenoids

5.4" BORE, 60 V12 VEHICULAR ENGINE Voltmeter

5.4" BORE, 60 V12 VEHICULAR ENGINE V-Belt Tension Chart

Installation Procedure For The 138-7020 Harness Assembly{1408} Installation Procedure For The 138-7020 Harness Assembly{1408}

Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250} Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}

Generator Set Start-up Checklist{1021, 1404, 7002} Generator Set Start-up Checklist{1021, 1404, 7002}

Installing the Air Inlet Heater System{1090} Installing the Air Inlet Heater System{1090}

Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451} Instructions For EMCP II+ Field Retrofit Onto EMCP II Equipped Generator Sets{7490, 7451}

Repair Procedure: 3600 Series Cylinder Heads - Blended Fuel{1100} Repair Procedure: 3600 Series Cylinder Heads - Blended Fuel{1100}

PTO Installation And Applications Instruction{1165} PTO Installation And Applications Instruction{1165}

Conversion Of Generators From Self-Excited To Permanent Magnet{4450} Conversion Of Generators From Self-Excited To Permanent Magnet{4450}

Installation Procedure For The 136-4304 Wiring Harness Assembly{1090} Installation Procedure For The 136-4304 Wiring Harness Assembly{1090}