Engine Oil Cooler - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use two technicians to put oil cooler (33), oil cooler bonnet (1) and oil cooler bonnet (5) for the oil cooler into position on the engine as an assembly. The weight of the oil cooler assembly is approximately
24 kg (53 lb) . - Put the oil cooler assembly in position on the engine and install bolts (1) that hold oil cooler bonnet (2) to the engine.
- Install bolts (4) that hold oil cooler bonnet (5) for the oil cooler to the water pump.
Show/hide table
| |
| Illustration 1 | g00619340 |
|
Typical example | |
End By:
- Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
SR4B Generators Exciter - Remove and Install
3500B Engines Turbocharger - Remove - Center Mounted Turbocharger
3512B Marine Auxiliary Engine MID 047 - CID 0446 - FMI 05 Air Shutoff Relay open
3512B Marine Auxiliary Engine MID 047 - CID 0444 - FMI 03 Start Relay short to +batt
3126B Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
3512B Marine Auxiliary Engine MID 036 - CID 0444 - FMI 03 Start Relay short to +batt
3054 Truck Engine Crankshaft Pulley
On-Highway Engines Electronic PTO Installation and Application Guide Programmable Parameters
3054 Truck Engine Crankcase Breather
3500B Engines Turbocharger - Install - Rear Mounted Turbocharger
3512B Marine Auxiliary Engine MID 111 - CID 1215 - FMI 05 Thermocouple #15 open circuit
3054 Truck Engine Water Temperature Regulator Housing
3500B Engines Turbocharger - Install - Center Mounted Turbocharger
3512B Marine Auxiliary Engine MID 111 - CID 1353 - FMI 03 Engine Air Mnfld Out Temp Sens open/short to +batt
3512B Marine Auxiliary Engine MID 111 - CID 1353 - FMI 04 Engine Air Mnfld Outlet Temp Sensor short to gnd
3512B Marine Auxiliary Engine MID 111 - CID 1354 - FMI 03 Right Turbo Air Out Temp Sens open/short to +batt
3512B Marine Auxiliary Engine MID 111 - CID 1354 - FMI 04 Right Turbo Air Outlet Temp Sensor short to gnd
3512B Marine Auxiliary Engine MID 111 - CID 1355 - FMI 03 Left Turbo Air Out Temp Sensor open/short to +batt
3512B Marine Auxiliary Engine MID 111 - CID 1355 - FMI 04 Left Turbo Air Outlet Temp Sensor short to gnd
G3304 and G3306 Engines Pressure Sensor
G3304 and G3306 Engines Governor
3406E On-Highway Engine Engine Oil Cooler - Assemble
3406E On-Highway Engine Front Cover - Remove
3406E On-Highway Engine Front Cover - Install