Alternator - Remove and Install
Removal Procedure
- Open the hood of the machine.
- Remove six bolts (1) and the washers. Remove access panel (2) .
Show/hide table
Illustration 1 | g00539125 |
This view is beneath the machine. |
- Put identification marks on all alternator wires that are connected to the alternator. Disconnect cables (4) and (7). Disconnect connectors (5) and (6) .
Show/hide table
Illustration 2 | g00539128 |
- Remove bolt (3) .
- Loosen bolt (8).
Show/hide table
Illustration 3 | g00539122 |
This view is beneath the machine. |
- Remove bolt (9) .
- Remove the V-belts (10) from the alternator.
- Remove the alternator.
Installation Procedure
- Position the alternator on the mounting bracket. Install the bolt (9) that fastens the alternator to the mounting bracket. Do not tighten bolt (9) at this time.
Show/hide table
Illustration 4 | g00539122 |
This view is beneath the machine. |
- Install two V-belts (10) in position on the alternator pulley.
- Connect cables (4) and (7) in the original locations on the alternator. Connect connectors (5) and (6) .
Show/hide table
Illustration 5 | g00539128 |
- Install bolt (3) .
- Adjust the tension of the V-belts. Refer to Operation and Maintenance Manual for the correct adjustment procedure.
- Tighten bolt (8) .
- Hold access panel (2) and install the washers with the bolts (1) .
Show/hide table
Illustration 6 | g00539125 |
This view is beneath the machine. |
Caterpillar Information System:
317B Excavator Machine System and Attachment Specifications Cycle Times
302.5 Mini Hydraulic Excavator Hydraulic System Pressure - Release
302.5 Mini Hydraulic Excavator Hydraulic Oil Contamination - Test
320B Excavator Machine System Specifications Lines (Pilot) - Harvester
317B Excavator Machine System and Attachment Specifications Lines (Front) - VAB Double Action
3046 Engine For Caterpillar Built Machines Lifter Group - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Water Temperature Regulator
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Swing)
M312, M315, M318 and M320 Excavators Hydraulic System Gear Pump (Charge)
3046 Engine For Caterpillar Built Machines Cylinder Head - Install
320B Excavator Machine System Specifications Bucket
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
330B Excavator Machine System Specifications Lines (Pump)
307B Excavator Supplement for 4M40 Engine Electric Starting Motor - Remove and Install
307B Excavator Supplement for 4M40 Engine Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
307B Excavator Supplement for 4M40 Engine Water Separator - Remove and Install
307B Excavator Supplement for 4M40 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Bucket Tips - Inspect/Replace
330B and 330B L Excavators Shipping Specifications
330B Excavator Machine System Specifications Lines (Front)
307B Excavator Supplement for 4M40 Engine Engine Oil Filter and Oil Filter Base - Remove and Install
307B Excavator Supplement for 4M40 Engine Air Cleaner - Remove and Install
330B Excavator Machine System Specifications Lines (Swing Motor)
307B Excavator Supplement for 4M40 Engine Muffler - Remove and Install