Lifter Group - Remove and Install
Removal Procedure
Start By:
- Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use a magnet to remove valve lifter (1), as shown. Put identification marks on the valve lifters for installation purposes.
Show/hide table
 | |
| Illustration 1 | g00532246 |
Show/hide table
 | |
| Illustration 2 | g00532061 |
- Repeat Step 1 for the remainder of the valve lifters.
Installation Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put 8T-2998 Lubricant on valve lifter (1) prior to installation. Install valve lifter (1) in the original location in the cylinder block.
Show/hide table
| | |
| Illustration 3 | g00532061 |
- Repeat Step 1 for the remainder of the valve lifters.
End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Water Temperature Regulator
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Swing)
M312, M315, M318 and M320 Excavators Hydraulic System Gear Pump (Charge)
3046 Engine For Caterpillar Built Machines Cylinder Head - Install
320B Excavator Machine System Specifications Bucket
M312, M315, M318 and M320 Excavators Hydraulic System Pump Control (Main Hydraulic)
317B Excavator Machine System and Attachment Specifications Lines (Boom Cylinder) - Right Hand (with BLCV)
3046 Engine For Caterpillar Built Machines Cylinder Head - Remove
302.5 Mini Hydraulic Excavator Capacities (Refill)
317B Excavator Machine System and Attachment Specifications Lines (Boom Cylinder) - Left Hand (with BLCV)
5110B Excavator, 24H Motor Grader, 69D, 769D, 773D, 773E, 776D and 777D Off-Highway Truck/Tractors, 771D, 775D and 775E Quarry Trucks and AD40 Series II, AD45 and AE40 II Underground Articulated Trucks Caterpillar Monitoring System Alert Indicator Description
3046 Engine For Caterpillar Built Machines Rocker Shaft - Disassemble
317B Excavator Machine System and Attachment Specifications Lines (Front) - VAB Double Action
320B Excavator Machine System Specifications Lines (Pilot) - Harvester
302.5 Mini Hydraulic Excavator Hydraulic Oil Contamination - Test
302.5 Mini Hydraulic Excavator Hydraulic System Pressure - Release
317B Excavator Machine System and Attachment Specifications Cycle Times
307B Excavator Supplement for 4M40 Engine Alternator - Remove and Install
330B Excavator Machine System Specifications Lines (Pump)
307B Excavator Supplement for 4M40 Engine Electric Starting Motor - Remove and Install
307B Excavator Supplement for 4M40 Engine Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
307B Excavator Supplement for 4M40 Engine Water Separator - Remove and Install
307B Excavator Supplement for 4M40 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Bucket Tips - Inspect/Replace