Fuel Transfer Pump - Remove
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove fuel outlet line (1) from fuel transfer pump (3). Immediately cap all openings or plug all openings in order to prevent contamination.
- Cut nylon strap (2) that fastens the wiring harness to the unit injector hydraulic pump.
Show/hide table
Illustration 2 g00612496 - Remove the bolts, clip (4) and fuel transfer pump (3) from the unit injector hydraulic pump.
Show/hide table
Illustration 3 g00612507 - Remove O-ring seal (5) from the unit injector hydraulic pump. Inspect O-ring seal (5) for wear or damage. If the O-ring seal is worn or damaged, use a new part for replacement.
Show/hide table
Illustration 4 g00612518 - Remove the elbows for the fuel inlet port and the fuel outlet port from the fuel transfer pump.
- Remove O-ring seal (6) from the elbow. Inspect O-ring seal (6) for wear or damage. If the O-ring seal is worn or damaged, use a new part for replacement.
Show/hide table
Illustration 1 | g00612458 |
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
G3304 and G3306 Engines Crankshaft
C-15, C-16 and C-18 Truck Engines Engine Oil Filter Base - Install
3500B Engines Camshaft
3612 and 3616 Engines Engine Oil Filler and Oil Level Gauge - Remove and Install
3126B Truck Engine Housing (Front) - Install
C-9 Engines for Caterpillar Built Machines Exhaust Manifold
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3126B Engines for Caterpillar Built Machines Housing (Front) - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Install
SR4B Generators Glossary
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Flywheel Housing - Remove
3612 and 3616 Engines Crankcase Explosion Relief Valve - Remove and Install
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
3500 Engines for Caterpillar Built Generator Sets Vibration Damper
C-9 Industrial Engine Flywheel Housing
3512B Marine Auxiliary Engine Housing (Front)
3126B and 3126E On-highway Engines Front Cover - Remove
3612 and 3616 Engines Water Temperature Regulator - Remove and Install
3126B and 3126E On-highway Engines Front Cover - Install
3126B and 3126E On-highway Engines Fuel Transfer Pump - Install
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3512B Marine Auxiliary Engine Turbocharger