Exhaust Manifold - Remove and Install
Removal Procedure
Start By:
- Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- If necessary, remove oil tube assembly (3) .
Show/hide table
Illustration 1 | g00557221 |
- Remove twelve exhaust manifold bolts (1) .
Show/hide table
Illustration 2 | g00522711 |
- Remove exhaust manifold (2) .
- Remove exhaust manifold gasket (4) that is located between exhaust manifold (2) and the cylinder head assembly.
Show/hide table
Illustration 3 | g00522717 |
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install exhaust manifold gasket (4) between exhaust manifold (2) and the cylinder head assembly.
Show/hide table
Illustration 4 | g00522717 |
- Install exhaust manifold (2) .
Show/hide table
Illustration 5 | g00522711 |
- Install twelve exhaust manifold bolts (1). Tighten exhaust manifold bolts (1) to a torque of 35 ± 5 N·m (26 ± 4 lb ft).
- If necessary, install oil tube assembly (3) .
Show/hide table
Illustration 6 | g00557221 |
End By: Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
Caterpillar Information System:
315B Excavator Excavator Systems Front Idler - Disassemble
320B Excavator Machine System Specifications Lines (Front)
315B Excavator Excavator Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
315B Excavator Excavator Systems Track - Connect
320B Excavator Machine System Specifications Lines (Front)
320B Excavator Machine System Specifications Fuel Tank
5130 Excavator Hydraulic System Control Valve (Travel Parking Brake Dual Pressure)
302.5 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
302.5 Mini Hydraulic Excavator Blade Linkage - Lubricate
302.5 Mini Hydraulic Excavator Cooling System Coolant Level - Check
315B Excavator Excavator Systems Track Roller - Install
315B Excavator Excavator Systems Track Roller - Assemble
315B Excavator Excavator Systems Front Idler - Assemble
3406E On-Highway Engine Engine Oil Pump - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Remove
315B Excavator Excavator Systems Recoil Spring - Disassemble
315B Excavator Excavator Systems Recoil Spring - Assemble
318B Excavator Machine System Specifications Final Drive
302.5 Mini Hydraulic Excavator Hydraulic System Oil Cooler Core - Clean
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Install
320B Excavator Machine System Specifications Governor Control
302.5 Mini Hydraulic Excavator Hydraulic System Oil - Change
307B Excavator Hydraulic System Relief Valve (One Way Flow Line) - Test and Adjust
318B Excavator Machine Systems Hydraulic Track Adjusters - Disassemble