Connecting Rod Bearings - Remove
开始:
- 拆下发动机油底壳。 请参阅拆解和组装 , "发动机油底壳 - 拆卸和安装" 。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 检查连杆 (3) 和连杆盖 ( 2) 上的识别标记是否正确。 连杆 (3) 和连杆盖 ( 2) 朝向发动机右侧的那一侧应带有蚀刻编号。 该编号必须与气缸号一致。 轴承挡圈凹口也应在右侧。 如有必要,标记连杆和连杆盖 ( 2)。
- 拆下连杆盖螺栓 ( 1) 和连杆盖 (2)。
- 从连杆盖 (2) 上拆下连杆轴承 ( 5) 的下半部分。
- 推动连杆 (3) 远离曲轴。 拆卸连杆轴承 (4) 的上半部分。
- 重复步骤 1 至 4,以便拆卸其余的连杆轴承。
Show/hide table
图 1 | g01022743 |
Caterpillar Information System:
3406E On-Highway Engine Engine Oil Pump - Assemble
315B Excavator Excavator Systems Front Idler - Assemble
3046 Engine For Caterpillar Built Machines Exhaust Manifold - Remove and Install
315B Excavator Excavator Systems Front Idler - Disassemble
320B Excavator Machine System Specifications Lines (Front)
315B Excavator Excavator Systems Front Idler, Recoil Spring and Hydraulic Track Adjuster - Remove and Install
315B Excavator Excavator Systems Track - Connect
320B Excavator Machine System Specifications Lines (Front)
320B Excavator Machine System Specifications Fuel Tank
5130 Excavator Hydraulic System Control Valve (Travel Parking Brake Dual Pressure)
302.5 Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
302.5 Mini Hydraulic Excavator Blade Linkage - Lubricate
315B Excavator Excavator Systems Recoil Spring - Disassemble
315B Excavator Excavator Systems Recoil Spring - Assemble
318B Excavator Machine System Specifications Final Drive
302.5 Mini Hydraulic Excavator Hydraulic System Oil Cooler Core - Clean
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Install
320B Excavator Machine System Specifications Governor Control
302.5 Mini Hydraulic Excavator Hydraulic System Oil - Change
307B Excavator Hydraulic System Relief Valve (One Way Flow Line) - Test and Adjust
318B Excavator Machine Systems Hydraulic Track Adjusters - Disassemble
315B Excavator Excavator Systems Sprocket - Remove and Install
3046 Engine For Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Remove