315B Excavator Machine Systems Caterpillar


Boom Lighting - Remove and Install

Usage:

315B 1SW

Removal Procedure




    Illustration 1g00372532

  1. Disconnect harness assembly (2) .

  1. Remove nuts (1) from harness assembly (2) .

  1. Remove mounting bolt (4). Remove boom light (3) .

Installation Procedure




    Illustration 2g00372532

  1. Install boom light (3). Install mounting bolt (4) .

  1. Install nuts (1) for harness assembly (2). Tighten nuts (1) to a torque of 25 ± 5 N·m (18 ± 4 lb ft).

  1. Connect harness assembly (2) .

Caterpillar Information System:

315B and 315B L Excavator Supplement For 3046 Engine Flywheel Ring Gear - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Flywheel and Ring Gear - Remove and Install
315B Excavator Machine Systems Solenoid Valve (Swing Priority) - Remove and Install
M312 Excavator Machine System Bucket Linkage
322B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Governor Control Motor - Remove and Install
322B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
315B Excavator Machine Systems Pilot Valve (Travel) - Assemble
322B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
M312 Excavator Machine System Bucket - Ditch Cleaning, Rigid
315B Excavator Machine Systems Pilot Valve (Travel) - Disassemble
315B Excavator Machine Systems Final Drive Sprocket - Remove and Install
315B L Excavator Machine System Specifications Quick Coupler
315B Excavator Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
315B Excavator Machine Systems Solenoid Valve (Two Speed Travel) - Remove and Install
322B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
322B Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
322B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
315B and 315B L Excavator Supplement For 3046 Engine Crankcase Breather - Remove and Install
315B Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
315B Excavator Machine Systems Window Wiper Motor - Remove and Install
M312 Excavator Machine System Bucket Linkage - Pin Assembly
315B and 315B L Excavator Supplement For 3046 Engine Air Conditioner Dryer - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.