Bucket Linkage
Show/hide table
Illustration 1 | g03400016 |
Show/hide table
Specification for 118-5508 Bucket Linkage Gp     | |||
Item     | Qty     | Part     | Specification Description     |
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings , the bucket, and the cylinder pin bores.     | |||
1     | 2     | 093-1434 Lip Type Seal     | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.     |
2     | After you assemble the bushing coat all the bores and the bushing with 5P-0960 Grease Cartridge .     | ||
2 | 113-4982 Bushing     | Bore before assembly is 70.23 ± 0.02 mm (2.765 ± 0.001 inch).     | |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
3     | 1     | 117-9436 Bushing     | Bore before assembly is 50.18 ± 0.02 mm (1.976 ± 0.001 inch).     |
Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch). |
|||
4     | 3     | 7X-2552 Bolt     | Torque to 300 ± 40 N·m (221 ± 30 lb ft).     |
5     | 2     | 169-1360 Pin As     | Diameter is 49.850 ± 0.025 mm (1.9626 ± 0.0010 inch).     |
6     | As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.04 inch):     |
||
6 | 163-7168 Shim     | Thickness is 0.5 mm (0.02 inch).     |
|
6 | 9R-7273 Spacer     | Thickness is 1.0 mm (0.04 inch).     |
|
7     | 1     | 123-0516 Pin As     | Diameter is 49.850 ± 0.025 mm (1.9626 ± 0.0010 inch).     |
Caterpillar Information System:
322B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Governor Control Motor - Remove and Install
322B Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
315B Excavator Machine Systems Pilot Valve (Travel) - Assemble
322B Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
M312 Excavator Machine System Bucket - Ditch Cleaning, Rigid
315B Excavator Machine Systems Pilot Valve (Travel) - Disassemble
315B Excavator Machine Systems Final Drive Sprocket - Remove and Install
315B Excavator Machine Systems Pilot Valve (Travel) - Install
307B Excavator Rubber Segment Track Operation - If Equipped
315B and 315B L Excavator Supplement For 3046 Engine Oil Pan - Remove and Install
315B Excavator Machine Systems Recoil Spring - Assemble
315B Excavator Machine Systems Solenoid Valve (Swing Priority) - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Flywheel and Ring Gear - Remove and Install
315B and 315B L Excavator Supplement For 3046 Engine Flywheel Ring Gear - Remove and Install
315B Excavator Machine Systems Boom Lighting - Remove and Install
315B L Excavator Machine System Specifications Quick Coupler
315B Excavator Machine Systems Solenoid Valve (Travel Speed) - Remove and Install
315B Excavator Machine Systems Solenoid Valve (Two Speed Travel) - Remove and Install
322B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
315B and 315B L Excavator Supplement For 3046 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
322B Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
322B Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
315B and 315B L Excavator Supplement For 3046 Engine Crankcase Breather - Remove and Install