Material Handler Stick Hydraulic Cylinder Rod Flexing Caterpillar


Material Handler Stick Hydraulic Cylinder Rod Flexing

Usage:

EXCAVATORS350 L (3ML, 9FL, 8KZ) EXCAVATORS

Problem:

Certain material handler configurations may experience stick cylinder rod flexing. The flexing action can reduce the service life of the stick cylinder pin and the plates that retain the pin.

Solution:

New components for the stick group are available. Install the new components when replacing the former components in the 128-6092 Stick Group (not serviced). The new and former components are listed in the chart.

COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar Information System:

Quick Coupler Pins Quick Coupler Pins
XT6 Hose On 375 Excavators Replaces The XT5 Hose To Increase Reliability And Durability XT6 Hose On 375 Excavators Replaces The XT5 Hose To Increase Reliability And Durability
Remanufactured Water Pump For 3500 Engine Remanufactured Water Pump For 3500 Engine
Test Procedure For Electrical Components Of Air Conditioning System Test Procedure For Electrical Components Of Air Conditioning System
Governor Instability Governor Instability
Oil In Turbochargers Oil In Turbochargers
The Low Idle RPM May Drop Below Specifications The Low Idle RPM May Drop Below Specifications
Backup Switch For The Auxiliary Controller May Be Wired Incorrectly Backup Switch For The Auxiliary Controller May Be Wired Incorrectly
Unlatched Condition Of Operator Console (Armrest) May Prevent Or Interrupt Machine Operations Unlatched Condition Of Operator Console (Armrest) May Prevent Or Interrupt Machine Operations
Oil Pan Cracking Oil Pan Cracking
Inspect Track Seal Load Rings Inspect Track Seal Load Rings
Gear Pump For The Brake, Pilot And Steering System May Have Failures To Front Bearing Or Front Shaft Gear Pump For The Brake, Pilot And Steering System May Have Failures To Front Bearing Or Front Shaft
ECM Code And ET Code Cross-Reference ECM Code And ET Code Cross-Reference
Proper Use Of The Wheel Excavator While Traveling Down A Grade Proper Use Of The Wheel Excavator While Traveling Down A Grade
Turbocharger Drain Tube Gasket May Leak Turbocharger Drain Tube Gasket May Leak
Efficiency Check For The Travel Make-Up Flow During Travel Operation Efficiency Check For The Travel Make-Up Flow During Travel Operation
Swing Drive Seals May Be Installed Incorrectly On Certain Large Mining Excavators Swing Drive Seals May Be Installed Incorrectly On Certain Large Mining Excavators
Valve Spring Failures On 3100 Engines Produced By Shin Caterpillar Mitsubishi (SCM) At Sagami Valve Spring Failures On 3100 Engines Produced By Shin Caterpillar Mitsubishi (SCM) At Sagami
Increased Case Drain Pressure May Cause Swing Motor Failure (Reoccurence) Increased Case Drain Pressure May Cause Swing Motor Failure (Reoccurence)
Lower Windshield Glass For Cab Is Identified Incorrectly Lower Windshield Glass For Cab Is Identified Incorrectly
Engine Fueling Overheating Engine Fueling Overheating
Switch Contacts Become Tarnished Switch Contacts Become Tarnished
Service Support Literature Identified For Certain Track-Type Excavators Service Support Literature Identified For Certain Track-Type Excavators
Hydraulic Horsepower Testing Hydraulic Horsepower Testing
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.