Usage:
When installing the swing bearing, stamp mark "S" (2) on inner race must be positioned, as shown, relative to car body and stopper (1) on outer race.
(3) Apply 2P-2506 Lubricant to the surfaces of parts which contact with dowels.
(4) Apply 9S-3263 Thread Lock on threads of eight bolts. Torque for bolts ... 37 ± 4 N·m (27 ± 3 lb ft)
(5) Torque for bolts ... 5 ± 1 N·m (4 ± 1 lb ft)
(6) Apply 2P-2506 Lubricant on threads of thirty-six bolts. Torque for bolts ... 900 ± 100 N·m (660 ± 75 lb ft)
(7) Apply 2P-2506 Lubricant on threads of forty bolts. Torque for bolts ... 900 ± 100 N·m (660 ± 75 lb ft)
(8) Apply 9S-3263 Thread Lock on threads of four bolts. Torque for bolts ... 37 ± 4 N·m (27 ± 3 lb ft)
(9) Remove access cover after the swing bearing has been installed. Add about 26 kg (57 lbs) of Multipurpose Molybdenum Grease (MPGM).
(10) Torque for plug ... 60 ± 6 N·m (44 ± 4 lb ft)
Apply 1U-8846 Gasket Maker on surfaces indicated by E.