Generator Set Control Panel for Switchgear Conversion Caterpillar

The Generator Set Control Panel for Switchgear Conversion should be used with the floor-standing switchgear. This control panel provides basic engine monitoring and engine protection functions. The functions are needed to safely operate the engine and the generator. Also, the functions help efficiently operate the engine and the generator.

Many functions of the control panel are performed by the control board. Various input components and output components also perform functions. These functions are included in the following list.

• Fault Management (Engine Protection)

• Engine Control

• Fuel System (Activation)

• Starting Motor Control

• Cycle Crank

• Overspeed Protection

Note: The switchgear will contain all AC meter modules that are used for generator voltage, amperage readings and frequency. Also, the switchgear will contain operator controls that are normally found on the generator set control panel. The operator controls are listed below.

• An engine control switch (ECS) that is used for starting and stopping the engine

• A voltage adjust rheostat (VAR)

• A speed potentiometer (SP) or governor switch (GS)

• Additional operator controls that are specific to the application