Oil Filter and Base (Rear Axle Lubrication) - Remove and Install
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Start By:
- Release the hydraulic system pressure.
Show/hide table
Illustration 1 | g06261610 |
Show/hide table
Illustration 2 | g06261705 |
Show/hide table
Illustration 3 | g06261733 |
Show/hide table
Illustration 4 | g06261746 |
Install the oil filter and base in the reverse order of removal.
Show/hide table
Illustration 5 | g06263078 |
Caterpillar Information System:
New Software Version Is Now Used on Certain Telehandlers {7610, 7620} New Software Version Is Now Used on Certain Telehandlers {7610, 7620}
The Valve Compensator Could Fail on Certain E, F, and F2 Series Backhoe Loaders. {5051} The Valve Compensator Could Fail on Certain E, F, and F2 Series Backhoe Loaders. {5051}
New Hardware for the Position Sensor and Mounting Group Is Now Used on Certain 259D Compact Track Loaders, 257D Multi-Terrain Loaders, and 242D Skid Steer Loaders {1408, 4806, 5736, 7400} New Hardware for the Position Sensor and Mounting Group Is Now Used on Certain 259D Compact Track Loaders, 257D Multi-Terrain Loaders, and 242D Skid Steer Loaders {1408, 4806, 5736, 7400}
785G Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Assemble
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D7R II Track Type Tractor Maintenance Interval Schedule
An Improved Pinion Shaft on the Bevel Gear Group of the Rear Axle is Now used on Certain 424B Backhoe Loaders {3256, 3258, 3260, 4251} An Improved Pinion Shaft on the Bevel Gear Group of the Rear Axle is Now used on Certain 424B Backhoe Loaders {3256, 3258, 3260, 4251}
Regulatory Compliance Information Wireless Device - Pipelayer LMI 4 System- If Equipped
986K Wheel Loader Systems Manifold Group - Load Sense
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Schematic (Hydraulic Fan)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Piston Motor (Fan Drive)
AP500F, AP555F, AP600F, AP655F, AP655F L, AP1000F and AP1055F Asphalt Pavers and SE50 and SE60 Asphalt Screeds Switch Circuits - Test
785G Off-Highway Truck Power Train Oil Filter and Base (Rear Axle Lubrication) - Disassemble
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Pump Control
New Fuel Additive is Now Used on Machines Produced at Piracicaba Facility {1250, 1280} New Fuel Additive is Now Used on Machines Produced at Piracicaba Facility {1250, 1280}
986K Wheel Loader Engine Supplement Air Cleaner - Remove and Install
Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416} Improved Start Switch Assembly is Now Used on Certain Cat® Products {1416}
725 and 730 Articulated Trucks Machine Systems Front Suspension Cylinder - Remove and Install
CB1.7 and CB1.8 Utility Compactors Operation
994K Wheel Loader Braking System - Test
Improved Transmission Intermediate Speed Sensor Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 3030, 3073, 3167, 3175} Improved Transmission Intermediate Speed Sensor Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 3030, 3073, 3167, 3175}
785G Off-Highway Truck Power Train Oil Filter and Base (Torque Converter) - Remove and Install
New Procedures for Retrofitting Lift Arms Are Now Available for SSL/MTL/CTL Machines {7054} New Procedures for Retrofitting Lift Arms Are Now Available for SSL/MTL/CTL Machines {7054}
3516E Engine for Tier 4 Final 994K Wheel Loaders Diagnostic Trouble Codes
3516E Engine for Tier 4 Final 994K Wheel Loaders Event Codes