AP655F and AP655F L Asphalt Paver Machine Systems Caterpillar


Screed Frame

Usage:

AP655F 452


Illustration 1g06218981

Table 1
Item  Qty  Part  Specification Description 
24  422-4637 Nut  Before assembly, apply Loctite C5A Copper Anti-Seize to the threads.
Tighten nut, until the nut contacts with screed plate. Then, back off the nut by 90 degrees. 
8T-4186 Bolt  Before assembly, apply blue Loctite 243 to the threads.
Torque to 15 ± 2 N·m (133 ± 18 lb in)


Illustration 2g06218984
Detail view of area A

Table 2
Item  Qty  Part  Specification Description 
As required, use any combination of below two shims in order to limit the gap between outside end of plate and extender tube to maximum of 0.5 mm (0.02 inch)
457-5146 Shim  Thickness of one new shim is 0.8 mm (0.03150 inch)
440-9436 Shim  Thickness of one new shim is 1.6 mm (0.063 inch)
440-9437 Shim  Thickness of one new shim is 3.0 ± 0.3 mm (0.12 ± 0.012 inch)
457-5245 Shim  Thickness of one new shim is 0.8 mm (0.03150 inch)
422-9030 Shim  Thickness of one new shim is 1.6 mm (0.063 inch)
422-9029 Shim  Thickness of one new shim is 3.0 ± 0.3 mm (0.12 ± 0.012 inch)

Caterpillar Information System:

A New Steering Ball Stud Breaker Service Tool for 789, 793, 795 and 797 Large Off-Highway Trucks is Available {0374, 0732, 4300, 4305, 4343} A New Steering Ball Stud Breaker Service Tool for 789, 793, 795 and 797 Large Off-Highway Trucks is Available {0374, 0732, 4300, 4305, 4343}
986K Wheel Loader Fuel System Primary Filter - Replace
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 0163 - FMI 08
Procedure to Remove Backhoe Controls and Install 473-9943 Hydraulic Hand Control Gp {5063} Procedure to Remove Backhoe Controls and Install 473-9943 Hydraulic Hand Control Gp {5063}
797F and 797F XQ Off-Highway Trucks Daily Inspection
Procedure To Change Operator Controls From The Plus Pattern To The Cross Pattern {5063} Procedure To Change Operator Controls From The Plus Pattern To The Cross Pattern {5063}
785G OFF-HIGHWAY TRUCK Engine Supplement Electronic Control (Diesel Exhaust Fluid) - Remove and Install
The Mounting of the Right-Hand Platform is Improved on Certain New-Build 793D Off-Highway Trucks {7253} The Mounting of the Right-Hand Platform is Improved on Certain New-Build 793D Off-Highway Trucks {7253}
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 0163 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 0163 - FMI 04
New Software Version Is Now Available for Cat® Fleet Onboard With Cat® Generic Object Detection {7605, 7606, 7620} New Software Version Is Now Available for Cat® Fleet Onboard With Cat® Generic Object Detection {7605, 7606, 7620}
AP655F and AP655F L Asphalt Paver Machine Systems Deflector
AP655F and AP655F L Asphalt Paver Machine Systems Return Lines
AP655F and AP655F L Asphalt Paver Machine Systems Lines (Tamper)
426F2 Backhoe Loader Engine Supplement Engine - Remove - Tier 2
Screen Assemblies are Now Used in the Brake Oil Cooling Lines Group on Certain 777G Off-Highway Trucks {1365, 1374, 4257, 5057} Screen Assemblies are Now Used in the Brake Oil Cooling Lines Group on Certain 777G Off-Highway Trucks {1365, 1374, 4257, 5057}
785G OFF-HIGHWAY TRUCK Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
Engine Cross Tube Updates are Available for the 793F Off-Highway Truck {7051} Engine Cross Tube Updates are Available for the 793F Off-Highway Truck {7051}
426F2 Backhoe Loader Engine Supplement Engine - Install - Tier 2
An Improved Cab Door Latch Assembly is Now Available for Certain 700 Series Articulated Trucks {7308} An Improved Cab Door Latch Assembly is Now Available for Certain 700 Series Articulated Trucks {7308}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Centrifugal Oil Filter (Seals) - Replace - If Equipped with COF
A Common Boom Cylinder and Bucket Cylinder is Now Used on Certain Backhoe Loaders {5456, 5457, 5498} A Common Boom Cylinder and Bucket Cylinder is Now Used on Certain Backhoe Loaders {5456, 5457, 5498}
® Onboard 5.3 Configuration Guide MineStar Message Queue Retry
740 GC, 740 Ejector, 745 Articulated Truck Machine System Steering Column - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.