3034 Industrial Engine Caterpillar


Crankshaft Pulley

Usage:

3034 7EF



Illustration 1g00388442

Crankshaft pulley




Illustration 2g00388444

Wear sleeve




Illustration 3g00388445

Components of the crankshaft pulley

(1) Crankshaft pulley

Note: Apply a bead of 7M-7456 Bearing Mount Compound approximately 6.0 mm (0.24 inch) beyond the chamfer on the recess in the crankshaft pulley for the front power take-off.

(2) Timing case

(3) Wear sleeve

Follow the manufacturer's instructions in order to install the wear sleeve. The instructions are provided with the sleeve.

Note: Apply Loctite 5900 to the keyway and the surface of the washer on all crankshaft pulleys.

(4) Tighten the bolt to the following torque. ... 185 N·m (136 lb ft)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.