793F Off-Highway Truck Caterpillar


Air Conditioner Filter (Without Precleaner) - Clean

Usage:

793F D3T
如果注意到空气循环减少,清洁空调器的径向密封式空气滤清器。

空调器的空气滤清器滤芯位于驾驶室左后部检修门的后侧。

  1. 准备维修的机器。 请参阅操作和保养手册, "使机器作好保养准备"。


    图 1g06201838

  2. 打开检修门,卸下空气滤清器滤芯 (1)。

  3. 清洁前,先目视检查空气滤清器滤芯。 检查空气滤清器滤芯的密封、褶纸和外盖有无损坏。 使用新的空气滤清器滤芯更换损坏的空气滤清器滤芯。

  4. 使用低压压缩空气清除污浊空气滤清器滤芯中的灰尘。 空气压力不得超过 207 kPa (30 psi)。 使气流沿滤芯内的皱褶上下运动。 要特别小心以免损坏皱褶。

  5. 安装清洁的空气滤清器滤芯,关闭检修门。

Caterpillar Information System:

785G Off-Highway Truck Systems Hoist Electrical System - Test
793F Off-Highway Truck Air Conditioner Filter (With Precleaner) - Replace
986K Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped
797F CMD Off-Highway Trucks Monitoring System
725C2 Articulated Truck Oil Sample - Obtain
725C2 Articulated Truck Frame and Body - Lubricate
725C2 Articulated Truck Fluid Level - Check
797F CMD Off-Highway Trucks Specifications
Improvements for Operation in Cold-Weather Applications on Certain 777G Off-Highway Truck {1273, 1274, 1296} Improvements for Operation in Cold-Weather Applications on Certain 777G Off-Highway Truck {1273, 1274, 1296}
793F CMD Off-Highway Trucks Operation Information
793F and 793F XQ Off-Highway Trucks Prepare the Machine for Maintenance
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Position Sensor (Body)
986K Wheel Loader Engine Oil Level - Check
986K Wheel Loader Engine Oil Sample - Obtain
777G Off-Highway Truck Machine Systems Hoist Cylinder - Remove and Install
797F CMD Off-Highway Trucks Fuses, Circuit Breakers and Relays - Replace/Reset
797F CMD Off-Highway Trucks Fuses, Circuit Breakers and Relays - Replace/Reset
Assembling and Mounting the Non-Metallic Object Detection Sensor Enclosure Group {7010} Assembling and Mounting the Non-Metallic Object Detection Sensor Enclosure Group {7010}
586C LRC Site Prep Tractor Lubricant Viscosities - Fluids Recommendations
785G Off-Highway Truck Power Train Duo-Cone Seals - Install
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
Procedure to Install Improved Software to On-board Radio on CAT® Command for Underground Equipped Machines {733T} Procedure to Install Improved Software to On-board Radio on CAT® Command for Underground Equipped Machines {733T}
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Transmission Planetary
785G Off-Highway Truck Systems Additional Electrical Components
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.