Air Conditioner Filter (With Precleaner) - Replace
如果注意到空气循环减少，更换空调的径向密封式空气滤清器。
空调器的空气滤清器滤芯位于驾驶室左后部检修门的后侧。
- 准备维修的机器。 请参阅操作和保养手册, "使机器作好保养准备"。
Show/hide table
图 1 g06201853 - 松开锁闩 (1)。
- 卸下滤清器盖 (2) 和滤芯。
- 废弃旧的滤清器滤芯。
- 检查滤清器壳体。 用清洁的抹布清除所有碎屑。 不要用压缩空气清洁滤清器壳体。
- 安装一个新的滤清器滤芯。 按照滤芯上的方向进行定位。 不要清洁或继续使用滤清器滤芯。
- 安装滤清器盖并关闭锁闩。
Caterpillar Information System:
986K Wheel Loader Engine Oil (High Speed) and Oil Filter - Change - If Equipped
797F CMD Off-Highway Trucks Monitoring System
725C2 Articulated Truck Oil Sample - Obtain
725C2 Articulated Truck Frame and Body - Lubricate
725C2 Articulated Truck Fluid Level - Check
797F CMD Off-Highway Trucks Specifications
Improvements for Operation in Cold-Weather Applications on Certain 777G Off-Highway Truck {1273, 1274, 1296} Improvements for Operation in Cold-Weather Applications on Certain 777G Off-Highway Truck {1273, 1274, 1296}
793F CMD Off-Highway Trucks Operation Information
793F and 793F XQ Off-Highway Trucks Prepare the Machine for Maintenance
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Position Sensor (Body)
735C and 745C Articulated Trucks Oil Sample - Obtain
785G Off-Highway Truck Systems Hoist Control - Adjust
785G Off-Highway Truck Systems Hoist Electrical System - Test
793F Off-Highway Truck Air Conditioner Filter (Without Precleaner) - Clean
986K Wheel Loader Engine Oil Level - Check
986K Wheel Loader Engine Oil Sample - Obtain
777G Off-Highway Truck Machine Systems Hoist Cylinder - Remove and Install
797F CMD Off-Highway Trucks Fuses, Circuit Breakers and Relays - Replace/Reset
797F CMD Off-Highway Trucks Fuses, Circuit Breakers and Relays - Replace/Reset
Assembling and Mounting the Non-Metallic Object Detection Sensor Enclosure Group {7010} Assembling and Mounting the Non-Metallic Object Detection Sensor Enclosure Group {7010}
586C LRC Site Prep Tractor Lubricant Viscosities - Fluids Recommendations
785G Off-Highway Truck Power Train Duo-Cone Seals - Install
Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115} Installation Procedure of Cat Data Link (CDL) to J1939 Converter Kit on All Caterpillar Generator Sets with EMCP 4.2 Upgrade {0115}
Procedure to Install Improved Software to On-board Radio on CAT® Command for Underground Equipped Machines {733T} Procedure to Install Improved Software to On-board Radio on CAT® Command for Underground Equipped Machines {733T}