Exhaust Manifold
Usage:
Remove Industrial Engine Exhaust Manifold
preparatory step:
a) remove turbocharger (industrial engine)
1. Remove the turbocharger mounting bracket (1).
2. Remove the exhaust manifold retaining nuts.
3. Remove the exhaust manifold assembly-weight 55 lbs. (22,6 kg).
Install Industrial Engine Exhaust Manifold
1. Coat the seal rings between the two halves of the exhaust manifold with 9M3710 Anti-Seize Compound.
2. Install new exhaust manifold gaskets and coat the threads of the manifold studs with 9M3710 Anti-Seize Compound. Install the exhaust manifold assembly.
3. Coat ring seals (2) with 9M3710 Anti-Seize Compound and install turbocharger mounting bracket (1).
concluding step:
a) install turbocharger (industrial engine)
Caterpillar Information System:
D343 INDUSTRIAL & MARINE ENGINES Turbocharger
D343 INDUSTRIAL & MARINE ENGINES Turbocharger Heat Shield
D343 INDUSTRIAL & MARINE ENGINES Precombustion Chambers,Air Cleaner Housing
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D343 INDUSTRIAL & MARINE ENGINES Front Cover
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Front Seal
D343 INDUSTRIAL & MARINE ENGINES Pulley And Vibration Damper
D343 INDUSTRIAL & MARINE ENGINES Expansion Tank
D343 INDUSTRIAL & MARINE ENGINES Heat Exchanger
D343 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D343 INDUSTRIAL & MARINE ENGINES Oil Pump
D343 INDUSTRIAL & MARINE ENGINES Water Cooled Exhaust Manifold
D343 INDUSTRIAL & MARINE ENGINES Aftercooler Core
D343 INDUSTRIAL & MARINE ENGINES Camshafts
D343 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly
D343 INDUSTRIAL & MARINE ENGINES Pistons
D343 INDUSTRIAL & MARINE ENGINES Spacer Plate
D343 INDUSTRIAL & MARINE ENGINES Cylinder Liners
D343 INDUSTRIAL & MARINE ENGINES Jacket Water Pump
D343 INDUSTRIAL & MARINE ENGINES Sea Water Pump
D343 INDUSTRIAL & MARINE ENGINES Sea Water Pump Drive Group
D343 INDUSTRIAL & MARINE ENGINES Flywheel
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal