A Retrofit Procedure to Install LED Lights on Certain F-Series Off-Highway Trucks is Now Available {1408, 1429, 1432, 1434} Caterpillar


A Retrofit Procedure to Install LED Lights on Certain F-Series Off-Highway Trucks is Now Available {1408, 1429, 1432, 1434}

Usage:

770 BZZ
Off-Highway Truck/Tractor
770 (S/N: BZZ1-UP)
772 (S/N: RLB1-UP)
773F (S/N: EED1-UP)
777F (S/N: JRP1-UP; JXP1-UP)
Quarry Truck
775F (S/N: DLS1-UP)

A new retrofit procedure to install LED lights on certain Off-Highway Trucks is now available.

This Special Instruction outlines the parts and procedures necessary for retrofitting LED lights on certain 770, 772, 773F, 775F, 777F, Off-Highway Trucks.



Illustration 1g06144221
Upgrade kit view of headlights and back up lights for 770 through 777F Off-Highway Trucks

Overview

Production 770 through 777F Off-Highway Trucks is factory equipped with either halogen (standard) or HID (optional) headlights and backup lights. New light emitting diode (LED) head lights and backup lights are now available as parts replacement upgrades for 770through 777F Off-Highway Trucks. LED lights provide longer life, brighter light, consume less power and are more resistant to vibration or water damage. This change is a simple upgrade which can benefit many customer operations.

Upgrade Kit

To make the upgrade to LED lighting as simple as possible, Caterpillar has released an LED Light Upgrade Kit for 770F through 777F Off-Highway Trucks. This kit contains all the parts needed to convert to LED headlights and backup lights on a single machine. Detailed coverage, part number, and support information are shown in the charts below.

Table 1
LED Light Upgrade Kit Coverage 
Sales Model  Serial Numbers  Kit Part No.  Special Instruction 
770  S/N:BZZ1-673  520-1669(1)  M0078184 
772  S/N:RLB1-678  520-1669(1)  M0078184 
773F  S/N:EED1-1090  520-1670(2)  M0078184 
775F  S/N:DLS1-1076  520-1670 (2)  M0078184 
777F  S/N:JRP277-2237; S/N:JXP100-154  520–1670(2)  M0078184 
(1) Used by machines prior to serial number break. Machines after the serial number break only use kit 507–6478
(2) Used by machines prior to serial number break. Machines after the serial number break only use kit 570–1671

Refer to Special Instruction, M0078184, Retrofit Procedure to Install LED Lights on Certain F Series Off-Highway Trucks for information on this retrofit procedure.

The Special Instruction is available through the normal literature distribution system. The publication can also be found on the Caterpillar Service Information System (SIS).

Caterpillar Information System:

CB10 Vibratory Asphalt Compactor Machine Systems Visual Inspection
CB10 Vibratory Asphalt Compactor Machine Systems Machine Preparation for Troubleshooting
CB10 Vibratory Asphalt Compactor Propel System Visual Inspection
CB10 Vibratory Asphalt Compactor Propel System Machine Preparation for Troubleshooting
CB10 Vibratory Asphalt Compactor Propel System Parking Brake - Test
CB10 Vibratory Asphalt Compactor Propel System Travel Speed - Check
CB10 Vibratory Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Split Drum
CB10 Vibratory Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
CB10 Vibratory Asphalt Compactor Propel System Propel Current Minimum - Calibrate
CB10 Vibratory Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Propel) - Test - Solid Drum
CB10 Vibratory Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Propel) - Test - Split Drum
C7.1 Engines and Generator Sets ARD Nozzle - Test
All-Wheel Drive System Has Been Improved on Certain 14L Motor Graders {7000} All-Wheel Drive System Has Been Improved on Certain 14L Motor Graders {7000}
Installation Instructions for Optional Stiffener Group On Certain SE60V Asphalt Screeds {6643} Installation Instructions for Optional Stiffener Group On Certain SE60V Asphalt Screeds {6643}
NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091} NOx Sensor Location Identification for C3.4B Engines Used on Certain Paving Compactors {108F, 1091}
Air Cleaning Combs are Available for Cooling Package Cleanout On Certain Asphalt Pavers {7000} Air Cleaning Combs are Available for Cooling Package Cleanout On Certain Asphalt Pavers {7000}
Rework Procedure to Install a New Electronic Control Module (ECM) Bracket on Certain 797 Off-Highway Truck Engines {1901, 1901} Rework Procedure to Install a New Electronic Control Module (ECM) Bracket on Certain 797 Off-Highway Truck Engines {1901, 1901}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Brake Release System Air - Purge
New Monitor Software Is Now Available for Certain Cat® Products {7620} New Monitor Software Is Now Available for Certain Cat® Products {7620}
HFW221 Felling Head Safety Messages
HFW221 Felling Head Plate Locations and Film Locations
PM-620 and PM-622 Cold Planer Engine Supplement Diesel Exhaust Fluid Module - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines CID 0827 FMI 03 Left Exhaust Temperature open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0827 FMI 04 Left Exhaust Temperature short to ground
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.