Illustration 1 | g02714136 |
There are several specific safety messages on this work tool. The exact location of the safety messages and the description of the safety messages are reviewed in this section. Please become familiarized with all safety messages.
Make sure that all the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the safety messages if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety message. Loose adhesive will allow the safety message to fall.
Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a safety message on the replacement part. Any Cat dealer can provide new safety messages.
This danger message is on the base on both sides of the frame of the felling head.
Illustration 2 | g01683255 |
The operation of the machine can cause debris to fly. Stay clear of rotating blades and moving parts during machine operation. Stop the rotation of the cutting gear before approaching the machine. The flying debris, moving parts and/or rotating blades can cause serious injury or death. |
This danger message is on the base on both sides of the frame of the felling head.
Illustration 3 | g01683234 |
Stay clear of the rotating cutting blade during machine operation. Stop the rotation of the cutting blade and install the cutting guard before performing service work on the machine. Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual and the Service Manuals. Failure to follow the instructions or heed the warnings may result in personal injury or death. |
This warning message is on the base on both sides of the frame of the felling head.
Illustration 4 | g01683257 |
Personal injury can result from sudden release of high pressure oil. Do not check for leaks with your hands. A pinhole leak can penetrate the skin and cause serious injury or possible death. Always use a board or cardboard when checking for leaks. Release the pressure from the system before disconnecting oil lines. Read and understand the Operation and Maintenance Manual before performing any hydraulic system maintenance. |
This warning message is on the middle of the base on the front side of the felling head.
Illustration 5 | g02533878 |
Hand cutting hazard from saw blade. Could cause serious injury or death. Keep hands away from this area when blade movement is possible. |